Kerogen Maturity Determinations: New Techniques and Technologies

30 October 2014
  |  
,

Online Webinar - 10:00 a.m., CDT, 1 hour duration.

Cross disciplinary workflows play an important part of successful characterization of shale reservoirs. This course discusses how the artificial kerogen maturity of organic-rich Green River shale affects the petrophysical, micro-structural, geochemical and elastic properties. The shale sample with total organic carbon (TOC) of ~28% is used in the examination. It is then subjected to anhydrous pyrolysis for artificial maturation by cooking the sample at 350°C for three days. You will see evidence of horizontal cracks on the sample which are induced by hydrocarbon generation and expulsion.

We discuss how we measured ultrasonic velocities on the shale plug before and after maturation. A significant change in the P-wave anisotropy (ε) is observed after maturation. We will discuss about the TOC measurements and Rock-eval pyrolysis and how the geochemical properties are affected by kerogen maturation.

This course also shows how to characterize the changes in the internal structure of the source rock through kerogen maturation by using micro-structural techniques such as SEM imaging and micro-CT scanning. SEM images clearly show that a significant amount of porosity is developed in the organic matter during maturation. This porosity is due to conversion of solid kerogen to liquid or gaseous hydrocarbons. Grain density also increased due to the decomposition of lighter kerogen during pyrolysis.

We will discuss methods of kerogen isolation from the rock sample. We also demonstrate the measured elastic properties of an immatured isolated kerogen. The bulk modulus of kerogen is found to be between 4-5 GPa. This course also focuses on the effect of kerogen content and its maturity on seismic velocities and anisotropy for different organic rich shales. We will show you how the seismic anisotropy is affected by different levels of kerogen maturity.

Brief Outline:
  • Introduction and goals
  • Example: Green River shale samples, USA 
  • TOC and Rock-eval pyrolysis measurements 
  • Anhydrous pyrolysis for artificial kerogen maturation 
  • Microstructural characterization from SEM and micro-CT scanning 
  • Ultrasonic velocity measurements 
  • Comparison of petrophysical, geochemical, micro-structural and elastic properties before and after maturation 
  • Isolation of kerogen from source rock samples 
  • Elastic properties of isolated kerogen 
  • Examples from different shales on the relationship between seismic anisotropy and levels of kerogen maturity 
  • Conclusions

Limited to 15 student slots.  no refunds for cancellations after October 2, 2014.

Sponsored By:

 

Vicky Vicky Kroh Registrar, Education Department +1 918 560 2650 +1 918 560 2678
Susan Susan Nash, Ph.D. Director of Education and Professional Development +1 918 560 2604

Comments (0)

 

What Can I Do?

8165
Registration Form
Add Item

Enter Notes:
 
* You must be logged in to name and customize your collection.
Recommend Recommend
Printable Version Printable Version Email to a friend Email to a friend

See Also: Bulletin Article

See Also: Education Conference

See Also: Explorer Division Column EMD

See Also: Explorer Emphasis

Studies Shedding Shale’s Secrets
Getting to the nitty of Barnett’s gritty Studies Shedding Shale’s Secrets

See Also: Explorer Geophysical Corner

AAPG Non-endorsement Policy

The American Association of Petroleum Geologists (AAPG) does not endorse or recommend any products and services that may be cited, used or discussed in AAPG publications or in presentations at events associated with AAPG.