Explorer Article

This debate began decades ago: How much of the planet's natural gas is abiotic – made up of methane with nonbiological origins? At times, the scientific back-and-forth argument has resembled a slow-motion tennis match, with a new volley coming every few years. Now, Daniel Xia thinks he has helped deliver a winning smash across the net. His findings were most clearly laid out in a recent article “Validity of geochemical signatures of abiotic hydrocarbon gases on Earth,” by Xia and coauthor Yongli Gao, published in the Journal of the Geological Society.

Show more
American Association of Petroleum Geologists (AAPG)
Explorer Emphasis Article

As the United States and other developed countries embrace the prospect of transitioning to renewable energy, the need for critical minerals is skyrocketing. Solar plants, wind farms and electric vehicles require more minerals to build than their fossil fuel-based counterparts. For example, a typical electric car requires six times the mineral inputs of a conventional car, and an onshore wind plant requires nine times more mineral resources than a gas-fired plant, according to the International Energy Agency. Addressing the exploding need for critical minerals and how petroleum geoscientists can lead such efforts, members of AAPG’s Energy Minerals Division came together to discuss the future of critical minerals at the International Meeting for Applied Geoscience and Energy conference in Denver.

Show more
American Association of Petroleum Geologists (AAPG)
Latin America Blog

AAPG Distinguished Lecture Program Latin America & Caribbean Region Tour 2019 reached more than 145 participants from 5 Universities of Colombia, Peru and Mexico.

American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

A collection of abstracts from more than 50 academic papers regarding the controls and impacts of inorganic and organic diagenesis on mudstone hydrocarbon generation, reservoir properties and seal quality.

American Association of Petroleum Geologists (AAPG)
Latin America Blog

AAPG and the Brazilian Association of Petroleum Geologists invite you to join us for GTW Brazil 2019: Solutions for Appraisal and Development of Onshore and Offshore Fields, a Geosciences Technology Workshop (GTW) to be held at the Hilton Rio de Janeiro in Copacabana on 13-14 June. The workshop features a series of technical presentations, panels, roundtable discussions and networking opportunities with leaders and experts from Petrobras, Shell, Total, Enauta, and other local and international operators.

Show more
American Association of Petroleum Geologists (AAPG)
Middle East Blog

The AAPG Regional Variations in Charge Systems and the Impact on Petroleum Fluid Properties in Exploration workshop took place from 11-13 February 2019 at the Steigenberger Hotel, Business Bay, Dubai. This was the first edition of this workshop and we received 33 attendees from 20 different companies and 12 different countries.  

American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

The assessment of the natural temporal variability of source rock units is critical for the understanding of petroleum systems as changes in mineral matrix, organic matter (OM) concentration, and composition can significantly affect expulsion efficiency, primary and secondary migration processes, hydrocarbon quality as well as oil source rock correlation. Already small-scaled fluctuations within sediment successions can critically influence migration efficiency. High-resolution investigation of a well-preserved Lower Jurassic drill core (Toarcian Posidonia Shale) revealed seven discrete and systematic intervals of deviating source rock quality. These were composed of homogenized, non-laminated marls of light grey color, opposed to laminated dark grey background sedimentation. Both lithotypes differentiate not only in mineral composition, but particularly in OM content and quality. An average TOC content of app. 3.9 wt.% reached by the grey marl, is faced by an average TOC content of app. 7.8 wt.% measured for the laminated dark grey marls. Average hydrogen index for grey non-laminated marls was app. 550 mg HC/g TOC, whereas much higher source rock quality with 780 mg HC/g TOC was attained in the dark laminated marls. The marls lower OM concentration and inferior OM quality generates important domains for preferential migration of products, originated from the dark grey layers, or hydrocarbon cluster in case of limited migration into adjacent reservoirs. To assess the potential for preferential intake of hydrocarbons by the coarser-grained light marls and their qualification as migration avenues, artificial maturation experiments were performed with both lithotypes. Hydrocarbon generation was simulated by hydrous pyrolysis in two successive temperature steps 330 °C and 360 °C, covering an early maturity stage, as well as the end of the oil window. Both lithologies show striking differences, not only for the extract yield, but also for the timing of generation. OM quality differences were reflected by variable n-alkane distributions and molecular maturity parameters. High-resolution continuous data produced by non-destructive techniques allows to draw conclusions on i) source rock potential, ii) expulsion and migration processes , and iii) on prediction of petroleum accumulation within the sediment succession. High-resolution investigation in combination with artificial maturation experiments represent an easy-to-use tool in petroleum system analysis.

Show more
American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

The San Joaquin Basin lies west of the Sierra Nevada Mountains and east of the San Andre as Fault. Tens of kilometers of Mesozoic and Cenozoic sediments, including deep-water organic-rich source rocks, deposited in a forearc setting, comprise the basin and have contributed to a petroleum system that generates more than 70 percent of California 's daily oil production and includes three of the 10 largest oilfields in the United States. Based on a comprehensive 3D petroleum systems model of the San Joaquin basin, published by the USGS in 2008, we further refine the modeling to account for the unique depositional and tectonic history of the basin. Here, we compare various basal heat flow scenarios to model hydrocarbon generation and calibrate the results to available temperature and vitrinite reflectance (Vr) data. We investigate two types of crustal models: a McKenzie-type rift model, and a no-rift static crustal thickness model. Crustal stretching models calculate basal heat flow resulting from stretching/thinning of mantle and crust during initial (syn-rift) and thermal (post-rift) subsidence. This method uses rock matrix radiogenic heat production values. It does not account for transient effects resulting from burial and uplift of the basin fill. The static no-rift model, alternatively, calculates the basal heat flow based on a stable or non-thinning crust and mantle over time. This method uses estimated Uranium (U), Thorium (Th), and Potassium (K) concentrations within the rock material to then calculate the rock matrix heat production. Unlike the rift model, it accounts for the transient effects resulting from burial and uplift of the basin fill, which can have a considerable additional effect on the basal heat flow. Given the low probability of crustal stretching as the starting point for basal heat flow in the San Joaquin Basin and considering the forearc nature of the basin as well as the strong concentration of U, K, and Th in the Sierran granites, we focused on and refined the no-rift models. We manually account for the transitional nature of the San Joaquin basement from hot Sierran granite on the east to cool Franciscan oceanic rocks on the west. Radiogenic heat production from solely continental crust results in models that are too warm and cannot be calibrated to well temperature and Vr data. Solely oceanic models are too cool to match well data. ‘Combined crust’ incorporates a seismically derived suture zone that allows for a transition from oceanic to granitic basement, while the ‘intermediate crust’ mixes oceanic and continental radiogenic heat production. These models generate a good match to well data to the east and westward through the transition zone. Additionally, we are able to calibrate to wells off of the Belridge and Lost Hills structures. On structure wells, however, cannot be calibrated with a crustal conductive heat flow scenario and would require (local) elevated heat flows on the order of 20 mW/m 2. This is not in agreement with the generally cooler underlying oceanic crust and suggests that there might be a different and/or additional source of heat flow. Most likely, basin-scale hydrothermal groundwater flow, both along faults and up-structure, could account for elevated Vr and temperature. Convective heat flow would be an additional overprint or enhancement to conductive basal heat flow.

Show more
American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

The driving forces for conventional accumulations (structural or stratigraphic traps) are Forces of Buoyancy which are due to differences in densities of hydrocarbons and water. In contrast, the driving forces for unconventional tight accumulations are Forces of Expulsion which are produced by high pressures. That is an enormous difference and creates unconventional petroleum systems that are characterized by very different and distinctive characteristics. The Force of Expulsion pressures are created by the significant increase in volume when any of the three main kerogen types are converted to hydrocarbons. At those conversion times in the burial history, the rocks are already sufficiently tight so the large volumes of generated hydrocarbons cannot efficiently escape through the existing tight pore system, thus creating a permeability bottleneck that produces an overpressured compartment over a large area corresponding to the proper thermal oil and gas maturities for that basin. The forces initially created in these source rocks can only go limited distances into adjacent tight reservoirs (clastics or carbonates) above or below the source. The exact distance will vary depending on the pressure increase, matrix permeability, and fractures of that specific tight reservoir system. In general, the distances are small, in the orders of 10s to 100s of feet for oil and larger for more mobile gas systems. Those exact distance numbers are subject to ongoing investigations.   A plot of the pressure data versus elevation for a given formation is critical in determining whether an accumulation is conventional or unconventional. Conventional accumulations will have hydrocarbon columns of 10s to 100s of feet with the pressure in the hydrocarbons and that in the water equal at the bottom of the accumulation (at the HC-water contact). In contrast, the unconventional accumulations will show HC column heights of 1000s of feet with the pressure in the hydrocarbon phase and the water phase being the same at the top of the accumulation (at the updip transition zone). Those significant differences are critical for understanding and differentiating these two play types. Because the system is a pore throat bottleneck with very little or minimum lateral migration, the type of hydrocarbon s are closely tied to the thermal maturity required to generate those hydrocarbons. Thus the play concept begins with two important geochemical considerations: (1) where are the source rocks and what are the kerogen types and organic richness (TOC), and (2 ) where are they mature in the basin for oil, condensate, and gas in the basin. These parameters will very quickly define the fairway for the play. Then one has to add the critical information on the reservoirs themselves: composition (brittleness), thickness, and reservoir quality (matrix porosity and permeability). In summary, these tight unconventional petroleum systems (1) are dynamic , and (2) create a regionally inverted petroleum system with water over oil over condensate over gas for source rocks wit h Type I or II kerogen types.

Show more
American Association of Petroleum Geologists (AAPG)
Europe Blog

At the 3P Arctic Conference & Exhibition this September, Bernard Coakley will discuss active proposals and planned drilling across the Arctic Ocean, highlighting the scientific objectives for sampling the sedimentary column. 

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Tuesday, 2 December 2014, 2:00 p.m.–3:00 p.m.

The gas transport in organic-rich shales involves different length-scales, from organic and inorganic pores to macro- and macrofractures. In order to upscale the fluid transport from nanoscale (flow through nanopores) to larger scales (to micro- and macrofractures), multicontinuum methodology is planned to be used.

American Association of Petroleum Geologists (AAPG)
Webinar
Virtual Webinar
Tuesday, 30 June 2020, 1:00 p.m.–2:00 p.m.

Visiting Geoscientist Juan Pablo Lovecchio reviews general aspects of rifting, rifts and passive margin formation and evolution through time, as well as elements of petroleum system development.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Thursday, 23 April 2015, 2:00 p.m.–3:00 p.m.

Recent laboratory studies have revealed previously unknown behaviors in shale gas which unlock secrets of permeability and sweet spots in shale gas reservoirs. The presentation presents the findings and also goes into detail about how the new information can be applied in order to potentially improve recovery in reservoirs.

American Association of Petroleum Geologists (AAPG)
Webinar
Virtual Webinar
Tuesday, 30 June 2020, 3:00 p.m.–4:00 p.m.

El geocientífico visitante Juan Pablo Lovecchio revisa aspectos generales de la ruptura, grietas y formación pasiva de márgenes y evolución a través del tiempo, así como elementos del desarrollo del sistema petrolero.

American Association of Petroleum Geologists (AAPG)
Webinar
Virtual Webinar
Tuesday, 23 June 2020, 2:00 p.m.–3:00 p.m.

Visiting Geoscientist Mauricio Guizada provides an overview of general structural geology of the Andes, with a focus on the Central Andes. His talk covers topics related to onshore exploration, G&G methods in exploration and risk analysis. Join Mauricio Guizada via Zoom on June 23 at 4pm CDT.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Wednesday, 31 October 2012, 12:00 a.m.–12:00 a.m.

This e-symposium will focus on how surface geochemical surveys and Downhole Geochemical Imaging technologies can be utilized jointly to directly characterize the composition of hydrocarbons vertically through the prospect section.

American Association of Petroleum Geologists (AAPG)
DL Abstract

Paleozoic North America has experienced multiple mountain building events, from Ordovician to Permian, on all margins of the continent. These have had a profound effect on the resulting complex basins and their associated petroleum systems. Subsequent uplift, erosion and overprinting of these ancient systems impedes the direct observation of their tectonic history. However, the basin sedimentary records are more complete, and provide additional insights into the timing and style of the mountain building events. In this study, we employ ~90 1D basin models, ~30 inverse flexural models, isopachs, and paleogeographic maps to better understand the Paleozoic history of North America.

Show more

Request a visit from Kurt W. Rudolph!

American Association of Petroleum Geologists (AAPG)
VG Abstract

Production from unconventional petroleum reservoirs includes petroleum from shale, coal, tight-sand and oil-sand. These reservoirs contain enormous quantities of oil and natural gas but pose a technology challenge to both geoscientists and engineers to produce economically on a commercial scale. These reservoirs store large volumes and are widely distributed at different stratigraphic levels and basin types, offering long-term potential for energy supply. Most of these reservoirs are low permeability and porosity that need enhancement with hydraulic fracture stimulation to maximize fluid drainage. Production from these reservoirs is increasing with continued advancement in geological characterization techniques and technology for well drilling, logging, and completion with drainage enhancement. Currently, Australia, Argentina, Canada, Egypt, USA, and Venezuela are producing natural gas from low permeability reservoirs: tight-sand, shale, and coal (CBM). Canada, Russia, USA, and Venezuela are producing heavy oil from oilsand. USA is leading the development of techniques for exploring, and technology for exploiting unconventional gas resources, which can help to develop potential gas-bearing shales of Thailand. The main focus is on source-reservoir-seal shale petroleum plays. In these tight rocks petroleum resides in the micro-pores as well as adsorbed on and in the organics. Shale has very low matrix permeability (nano-darcies) and has highly layered formations with differences in vertical and horizontal properties, vertically non-homogeneous and horizontally anisotropic with complicate natural fractures. Understanding the rocks is critical in selecting fluid drainage enhancement mechanisms; rock properties such as where shale is clay or silica rich, clay types and maturation , kerogen type and maturation, permeability, porosity, and saturation. Most of these plays require horizontal development with large numbers of wells that require an understanding of formation structure, setting and reservoir character and its lateral extension. The quality of shale-gas resources depend on thickness of net pay (>100 m), adequate porosity (>2%), high reservoir pressure (ideally overpressure), high thermal maturity (>1.5% Ro), high organic richness (>2% TOC), low in clay (<50%), high in brittle minerals (quartz, carbonates, feldspars), and favourable in-situ stress. During the past decade, unconventional shale and tight-sand gas plays have become an important supply of natural gas in the US, and now in shale oil as well. As a consequence, interest to assess and explore these plays is rapidly spreading worldwide. The high production potential of shale petroleum resources has contributed to a comparably favourable outlook for increased future petroleum supplies globally. Application of 2D and 3D seismic for defining reservoirs and micro seismic for monitoring fracturing, measuring rock properties downhole (borehole imaging) and in laboratory (mineralogy, porosity, permeability), horizontal drilling (downhole GPS), and hydraulic fracture stimulation (cross-linked gel, slick-water, nitrogen or nitrogen foam) is key in improving production from these huge resources with low productivity factors.

Show more

Request a visit from Ameed Ghori!

American Association of Petroleum Geologists (AAPG)

Related Interests

See Also ...