Latin America Blog

AAPG Distinguished Lecture Program Latin America & Caribbean Region Tour 2019 reached more than 145 participants from 5 Universities of Colombia, Peru and Mexico.

American Association of Petroleum Geologists (AAPG)
Middle East Blog

The second edition of AAPG’s Structural Styles of the Middle East GTW took place from 9-11 December 2019 at the Sundus Rotana Hotel in Muscat, Oman. The workshop attracted 87 attendees from 23 different companies and 11 different countries.

American Association of Petroleum Geologists (AAPG)
Latin America Blog

AAPG and the Brazilian Association of Petroleum Geologists invite you to join us for GTW Brazil 2019: Solutions for Appraisal and Development of Onshore and Offshore Fields, a Geosciences Technology Workshop (GTW) to be held at the Hilton Rio de Janeiro in Copacabana on 13-14 June. The workshop features a series of technical presentations, panels, roundtable discussions and networking opportunities with leaders and experts from Petrobras, Shell, Total, Enauta, and other local and international operators.

Show more
American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

Interpretations of thermal maturation provide critical data needed for both conventional and unconventional resource assessments. The absence of true vitrinite in pre-Devonian sediments eliminates one of the most commonly measured geothermometers used for thermal maturity determination. Programmed pyrolysis parameters like Tmax can be of limited utility given the maturity regime. However, other organic macerals are potentially available to constrain thermal maturity. The current organic petrology study has been undertaken to provide a very detailed comparison of reflectance measurements on pyrobitumens, “vitrinite-like” material and graptolites.  In the Appalachian Basin of North America, Cambrian-aged source rocks were deposited in shallow water mixed carbonate-siliciclastic depositional environments. Solid pyrobitumen material is found to occur in both lenticular lens/layer morphology as well as distinct pore-filling angular varieties. Published formulas to calculate Equivalent Reflectance (Eq. Ro) from solid bitumens have been applied to these discrete morphological populations. In addition, a newly developed formula to calculate Eq. Ro from angular pyrobitumen (VRc=0.866*BRo ang + 0.0274) is introduced based upon statistical evaluation of reflectance readings from a global dataset. “Vitrinite-like” organic macerals were found in rare abundance within these potential source rocks, but their occurrence enables an independent comparison to pyrobitumen Eq. Ro values. Graptolites are another organic maceral that can be evaluated via organic petrology, but caution should be utilized since these tend to show a high degree of anisotropy. The results of this investigation provide additional geochemical guidance to assist geologists in more accurately interpreting thermal maturity in the Rome Trough region of the Appalachian Basin.

Show more
American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

Rock-Eval hydrogen index (HI) is often used to compare relative maturities of a source horizon across a basin. Usually, there are several measurements from the source horizon at a single well, and the mean hydrogen index is calculated, or the S2 is plotted against TOC. The slope of the best fit line through that data is used as the representative HI for that well (sometimes referred to as the ‘slope HI ’ methodology). There is a potential flaw in both these methodologies; however, that renders the calculated HI as misleading if the source horizon being examined is not relatively uniform in source quality, vertically in the stratigraphic column. From a geologic perspective, it would be unusual for the source rock quality not to vary vertically in the stratigraphic column. Organic matter input, preservation, dilution, and sediment accumulation rate typically vary in many depositional environments over the millions of years required to create a thick source rock package. Nevertheless, there are source rocks which do display remarkable source-quality uniformity from top to bottom of the stratigraphic package. We have examined source rocks from several basins where the source quality is relatively uniform over the stratigraphic column, and source rocks where the source quality varies greatly over the stratigraphic column. Methodologies to assess hydrogen index at specific wells for the se two scenarios differ. Most geoscientists may not be familiar with why a single technique is not suitable for both these scenarios, or how to correctly use hydrogen index as a relative maturation proxy in the case where source rock quality is not uniform. We will demonstrate how to determine if your source rock quality is uniform or varied relative to HI over the stratigraphic column, and how to assign a hydrogen index to the different source facies when that source rock quality is not uniform. Further we will illustrate how to estimate the original hydrogen index of the different source facies and assign each a transformation ratio. The transformation ratio is a better proxy for relative maturity, since different source facies may have different present-day hydrogen indices, but their present-day transformation ratio should be quite similar.

Show more
American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

The assessment of the natural temporal variability of source rock units is critical for the understanding of petroleum systems as changes in mineral matrix, organic matter (OM) concentration, and composition can significantly affect expulsion efficiency, primary and secondary migration processes, hydrocarbon quality as well as oil source rock correlation. Already small-scaled fluctuations within sediment successions can critically influence migration efficiency. High-resolution investigation of a well-preserved Lower Jurassic drill core (Toarcian Posidonia Shale) revealed seven discrete and systematic intervals of deviating source rock quality. These were composed of homogenized, non-laminated marls of light grey color, opposed to laminated dark grey background sedimentation. Both lithotypes differentiate not only in mineral composition, but particularly in OM content and quality. An average TOC content of app. 3.9 wt.% reached by the grey marl, is faced by an average TOC content of app. 7.8 wt.% measured for the laminated dark grey marls. Average hydrogen index for grey non-laminated marls was app. 550 mg HC/g TOC, whereas much higher source rock quality with 780 mg HC/g TOC was attained in the dark laminated marls. The marls lower OM concentration and inferior OM quality generates important domains for preferential migration of products, originated from the dark grey layers, or hydrocarbon cluster in case of limited migration into adjacent reservoirs. To assess the potential for preferential intake of hydrocarbons by the coarser-grained light marls and their qualification as migration avenues, artificial maturation experiments were performed with both lithotypes. Hydrocarbon generation was simulated by hydrous pyrolysis in two successive temperature steps 330 °C and 360 °C, covering an early maturity stage, as well as the end of the oil window. Both lithologies show striking differences, not only for the extract yield, but also for the timing of generation. OM quality differences were reflected by variable n-alkane distributions and molecular maturity parameters. High-resolution continuous data produced by non-destructive techniques allows to draw conclusions on i) source rock potential, ii) expulsion and migration processes , and iii) on prediction of petroleum accumulation within the sediment succession. High-resolution investigation in combination with artificial maturation experiments represent an easy-to-use tool in petroleum system analysis.

Show more
American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

The driving forces for conventional accumulations (structural or stratigraphic traps) are Forces of Buoyancy which are due to differences in densities of hydrocarbons and water. In contrast, the driving forces for unconventional tight accumulations are Forces of Expulsion which are produced by high pressures. That is an enormous difference and creates unconventional petroleum systems that are characterized by very different and distinctive characteristics. The Force of Expulsion pressures are created by the significant increase in volume when any of the three main kerogen types are converted to hydrocarbons. At those conversion times in the burial history, the rocks are already sufficiently tight so the large volumes of generated hydrocarbons cannot efficiently escape through the existing tight pore system, thus creating a permeability bottleneck that produces an overpressured compartment over a large area corresponding to the proper thermal oil and gas maturities for that basin. The forces initially created in these source rocks can only go limited distances into adjacent tight reservoirs (clastics or carbonates) above or below the source. The exact distance will vary depending on the pressure increase, matrix permeability, and fractures of that specific tight reservoir system. In general, the distances are small, in the orders of 10s to 100s of feet for oil and larger for more mobile gas systems. Those exact distance numbers are subject to ongoing investigations.   A plot of the pressure data versus elevation for a given formation is critical in determining whether an accumulation is conventional or unconventional. Conventional accumulations will have hydrocarbon columns of 10s to 100s of feet with the pressure in the hydrocarbons and that in the water equal at the bottom of the accumulation (at the HC-water contact). In contrast, the unconventional accumulations will show HC column heights of 1000s of feet with the pressure in the hydrocarbon phase and the water phase being the same at the top of the accumulation (at the updip transition zone). Those significant differences are critical for understanding and differentiating these two play types. Because the system is a pore throat bottleneck with very little or minimum lateral migration, the type of hydrocarbon s are closely tied to the thermal maturity required to generate those hydrocarbons. Thus the play concept begins with two important geochemical considerations: (1) where are the source rocks and what are the kerogen types and organic richness (TOC), and (2 ) where are they mature in the basin for oil, condensate, and gas in the basin. These parameters will very quickly define the fairway for the play. Then one has to add the critical information on the reservoirs themselves: composition (brittleness), thickness, and reservoir quality (matrix porosity and permeability). In summary, these tight unconventional petroleum systems (1) are dynamic , and (2) create a regionally inverted petroleum system with water over oil over condensate over gas for source rocks wit h Type I or II kerogen types.

Show more
American Association of Petroleum Geologists (AAPG)
Latin America Blog

Share your knowledge and learn from others at this multidisciplinary workshop to be held in Lima, Peru on 15-16 October 2015. Presentation proposals are due 30 August 2015. 

American Association of Petroleum Geologists (AAPG)
Europe Blog

At the 3P Arctic Conference & Exhibition this September, Bernard Coakley will discuss active proposals and planned drilling across the Arctic Ocean, highlighting the scientific objectives for sampling the sedimentary column. 

American Association of Petroleum Geologists (AAPG)
Europe Blog

At the 3P Arctic Conference & Exhibition this September Geir Richardson with Statoil will present 'Toward the 23rd Round' during the opening and plenary session.

American Association of Petroleum Geologists (AAPG)
Workshop
Bogota, Colombia
Wednesday, 17 March Thursday, 18 March 2021, 8:00 a.m.–5:00 p.m.

The AAPG Latin America & Caribbean Region and the Colombian Association of Petroleum Geologists and Geophysicists (ACGGP) invite you join us for GTW Colombia 2021, a specialized workshop bringing leading scientists and industry practitioners to share best practices, exchange ideas and explore opportunities for future collaboration. The 2-day workshop brings together technical experts and industry leaders from Colombia and throughout the Americas to take a multidisciplinary look at future opportunities for exploration and development of Southern Caribbean Frontier Basins.

Show more
American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Thursday, 11 November 2010, 12:00 a.m.–12:00 a.m.

This e-symposium is ideal for geologists, geophysicists, engineers and other geoscientists who are involved in gas shale exploration and production.

American Association of Petroleum Geologists (AAPG)
Online Certificate Course
Tuesday, 1 January 2013, 12:00 a.m.–1:00 a.m.

This course introduces the learner to the fundamentals of shale gas, including current theories that explain its origin, and how to determine which reservoirs are commercially viable.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Thursday, 29 October 2009, 12:00 a.m.–12:00 a.m.

Expanded package for CEU credit is $100 for AAPG members, and $145 for non-members. Special Student Pricing: $25 for Webinar only; $35 for Expanded package.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Thursday, 28 April 2011, 12:00 a.m.–12:00 a.m.

The Niobrara Petroleum System of the U.S. Rocky Mountain Region is a major tight petroleum resource play.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Tuesday, 16 August 2011, 12:00 a.m.–12:00 a.m.

The geochemistry of formation fluids (water and hydrocarbon gases) in the Uinta Basin, Utah, is evaluated at the regional scale based on fluid sampling and compilation of past records.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Tuesday, 2 December 2014, 2:00 p.m.–3:00 p.m.

The gas transport in organic-rich shales involves different length-scales, from organic and inorganic pores to macro- and macrofractures. In order to upscale the fluid transport from nanoscale (flow through nanopores) to larger scales (to micro- and macrofractures), multicontinuum methodology is planned to be used.

American Association of Petroleum Geologists (AAPG)
VG Abstract

Production from unconventional petroleum reservoirs includes petroleum from shale, coal, tight-sand and oil-sand. These reservoirs contain enormous quantities of oil and natural gas but pose a technology challenge to both geoscientists and engineers to produce economically on a commercial scale. These reservoirs store large volumes and are widely distributed at different stratigraphic levels and basin types, offering long-term potential for energy supply. Most of these reservoirs are low permeability and porosity that need enhancement with hydraulic fracture stimulation to maximize fluid drainage. Production from these reservoirs is increasing with continued advancement in geological characterization techniques and technology for well drilling, logging, and completion with drainage enhancement. Currently, Australia, Argentina, Canada, Egypt, USA, and Venezuela are producing natural gas from low permeability reservoirs: tight-sand, shale, and coal (CBM). Canada, Russia, USA, and Venezuela are producing heavy oil from oilsand. USA is leading the development of techniques for exploring, and technology for exploiting unconventional gas resources, which can help to develop potential gas-bearing shales of Thailand. The main focus is on source-reservoir-seal shale petroleum plays. In these tight rocks petroleum resides in the micro-pores as well as adsorbed on and in the organics. Shale has very low matrix permeability (nano-darcies) and has highly layered formations with differences in vertical and horizontal properties, vertically non-homogeneous and horizontally anisotropic with complicate natural fractures. Understanding the rocks is critical in selecting fluid drainage enhancement mechanisms; rock properties such as where shale is clay or silica rich, clay types and maturation , kerogen type and maturation, permeability, porosity, and saturation. Most of these plays require horizontal development with large numbers of wells that require an understanding of formation structure, setting and reservoir character and its lateral extension. The quality of shale-gas resources depend on thickness of net pay (>100 m), adequate porosity (>2%), high reservoir pressure (ideally overpressure), high thermal maturity (>1.5% Ro), high organic richness (>2% TOC), low in clay (<50%), high in brittle minerals (quartz, carbonates, feldspars), and favourable in-situ stress. During the past decade, unconventional shale and tight-sand gas plays have become an important supply of natural gas in the US, and now in shale oil as well. As a consequence, interest to assess and explore these plays is rapidly spreading worldwide. The high production potential of shale petroleum resources has contributed to a comparably favourable outlook for increased future petroleum supplies globally. Application of 2D and 3D seismic for defining reservoirs and micro seismic for monitoring fracturing, measuring rock properties downhole (borehole imaging) and in laboratory (mineralogy, porosity, permeability), horizontal drilling (downhole GPS), and hydraulic fracture stimulation (cross-linked gel, slick-water, nitrogen or nitrogen foam) is key in improving production from these huge resources with low productivity factors.

Show more

Request a visit from Ameed Ghori!

American Association of Petroleum Geologists (AAPG)

Related Interests

See Also ...