Oil Falls 3 Percent on OPEC Production Cut - 04 June, 2024 07:30 AM
The US Oil and Gas Industry Emits Less Carbon Than It Used To - 04 June, 2024 07:30 AM
Schumer, Senate Democrats Call for DoJ to Probe Big Oil for Alleged Collusion - 04 June, 2024 07:30 AM
BW Energy Confirms 'Substantial' Oil Discovery Offshore Gabon - 04 June, 2024 07:30 AM
OPEC+ Extends Oil Production Cuts into 2025 - 03 June, 2024 07:30 AM
Bottoms up! The successful Barnett play is getting a second look, thanks to a new study that took a bottomsup approach to determines areas with the best potential.
Gas generation is a commonly hypothesized mechanism for the development of high-magnitude overpressure. However, overpressures developed by gas generation have been rarely measured in situ, with the main evidence for such overpressures coming from source rock microfractures, the physical necessity of overpressures for primary migration, laboratory experiments, and numerical modeling. Indeed, previous in-situ observations suggest that gas generation only creates highly localized overpressures within rich source rocks. Pore-fluid pressure data and sonic velocity–vertical effective stress plots from 30 wells reveal that overpressures in the northern Malay Basin are primarily generated by fluid expansion and are located basinwide within the Miocene 2A, 2B, and 2C source rock formations. The overpressures are predominantly associated with gas sampled in more than 83% of overpressure measurements and have a sonic-density response consistent with gas generation. The association of fluid expansion overpressures with gas, combined with the sonic-density response to overpressure and a regional geology that precludes other overpressuring mechanisms, provides convincing in-situ evidence for basinwide gas generation overpressuring. Overpressure magnitude analysis suggests that gas generation accounts for approximately one-half to two-thirds of the measured excess pore pressure in the region, with the remainder being generated by coincident disequilibrium compaction. Thus, the data herein suggest that gas generation, if acting in isolation, is producing a maximum pressure gradient of 15.3 MPa/km (0.676 psi/ft) and not lithostatic magnitudes as commonly hypothesized. The gas generation overpressures in this article are not associated with a significant porosity anomaly and represent a major drilling hazard, with traditional pore-pressure prediction techniques underestimating pressure gradients by 2.3 1.5 MPa/km (0.1 0.07 psi/ft).
A joint AAPG–Society of Petroleum Engineers–Society of Exploration Geophysicists Hedberg Research Conference was held in Saint-Cyr sur Mer, France, on July 8 to 13, 2012, to review current research and explore future research directions related to improved production from carbonate reservoirs. Eighty-seven scientists from academia and industry (split roughly equally) attended for five days. A primary objective for the conference was to explore novel connections among different disciplines (primarily within geoscience and reservoir engineering) as a way to define new research opportunities. Research areas represented included carbonate sedimentology and stratigraphy, structural geology, geomechanics, hydrology, reactive transport modeling, seismic imaging (including four-dimensional seismic, tomography, and seismic forward modeling), geologic modeling and forward modeling of geologic processes, petrophysics, statistical methods, numerical methods for simulation, reservoir engineering, pore-scale processes, in-situ flow experiments (e.g., x-ray computed tomography), visualization, and methods for data interaction.
This seems like the perfect time to summarize Canadian oil and gas activity in 2012.
After World War II, the United States suddenly found itself with nuclear explosives, a tool for which there were few obvious uses other than spectacular and indiscriminate destruction.
3-D seismic data are being viewed as the way to reduce drilling cost overruns and maximize ultimate recovery from a shale-producing field – and for relatively minimal additional cost.
A regional database of more than 3,500 producing Eagle Ford wells is helping to highlight production trends and optimal engineering parameters.
What happens in the reservoir following hydrofracturing? Microseismic monitoring is providing some important answers.
Industry and academia are teaming up to pump up activity in the Mississippian of the Midcontinent United States.
An AAPG member is asked to provide a study on fractures and seismicity in New York, putting him at the epicenter of the state's debate over the use of hydraulic fracturing.
Three-dimensional (3D) seismic-reflection surveys provide one of the most important data types for understanding subsurface depositional systems. Quantitative analysis is commonly restricted to geophysical interpretation of elastic properties of rocks in the subsurface. Wide availability of 3D seismic-reflection data and integration provide opportunities for quantitative analysis of subsurface stratigraphic sequences. Here, we integrate traditional seismic-stratigraphic interpretation with quantitative geomorphologic analysis and numerical modeling to explore new insights into submarine-channel evolution.
Request a visit from Jacob Covault!
The carbonate sequences that were deposited in the now exhumed Tethyan Ocean influence many aspects of our lives today, either by supplying the energy that warms our homes and the fuel that powers our cars or providing the stunning landscapes for both winter and summer vacations. They also represent some of the most intensely studied rock formations in the world and have provided geoscientists with a fascinating insight into the turbulent nature of 250 Million years of Earth’s history. By combining studies from the full range of geoscience disciplines this presentation will trace the development of these carbonate sequences from their initial formation on the margins of large ancient continental masses to their present day locations in and around the Greater Mediterranean and Near East region. The first order control on growth patterns and carbonate platform development by the regional plate-tectonic setting, underlying basin architecture and fluctuations in sea level will be illustrated. The organisms that contribute to sequence development will be revealed to be treasure troves of forensic information. Finally, these rock sequences will be shown to contain all the ingredients necessary to form and retain hydrocarbons and the manner in which major post-depositional tectonic events led to the formation of some of the largest hydrocarbon accumulations in the world will be demonstrated.
Request a visit from Keith Gerdes!
Local sea-level changes are not simply a function of global ocean volumes but also the interactions between the solid Earth, the Earth’s gravitational field and the loading and unloading of ice sheets. Contrasting behaviors between Antarctica and Scotland highlight how important the geologic structure beneath the former ice sheets is in determining the interactions between ice sheets and relative sea levels.
Request a visit from Alex Simms!
In comparison with the known boundary conditions that promote salt deformation and flow in sedimentary basins, the processes involved with the mobilization of clay-rich detrital sediments are far less well established. This talk will use seismic examples in different tectonic settings to document the variety of shale geometries that can be formed under brittle and ductile deformations.
Request a visit from Juan I. Soto!
Physics is an essential component of geophysics but there is much that physics cannot know or address.
Request a visit from John Castagna!
As oil and gas exploration and production occur in deeper basins and more complex geologic settings, accurate characterization and modeling of reservoirs to improve estimated ultimate recovery (EUR) prediction, optimize well placement and maximize recovery become paramount. Existing technologies for reservoir characterization and modeling have proven inadequate for delivering detailed 3D predictions of reservoir architecture, connectivity and rock quality at scales that impact subsurface flow patterns and reservoir performance. Because of the gap between the geophysical and geologic data available (seismic, well logs, cores) and the data needed to model rock heterogeneities at the reservoir scale, constraints from external analog systems are needed. Existing stratigraphic concepts and deposition models are mostly empirical and seldom provide quantitative constraints on fine-scale reservoir heterogeneity. Current reservoir modeling tools are challenged to accurately replicate complex, nonstationary, rock heterogeneity patterns that control connectivity, such as shale layers that serve as flow baffles and barriers.
Request a visit from Tao Sun!
For well over a century there have been conflicting indications of the strength of the crust and of faults and what controls them. Much of our ignorance comes quite naturally from the general inaccessibility of the crust to measurement--in contrast with our understanding of the atmosphere, which is much more accessible to observation as well as more rapidly changing. Crustal strength is best understood in deforming sedimentary basins where the petroleum industry has made great contributions, particularly in deforming petroleum basins because of the practical need to predict. In this talk we take a broad look at key issues in crustal strength and deformation and what we can learn from boreholes, earthquakes, active fault systems, and toy models.
Request a visit from John Suppe!
Paleozoic North America has experienced multiple mountain building events, from Ordovician to Permian, on all margins of the continent. These have had a profound effect on the resulting complex basins and their associated petroleum systems. Subsequent uplift, erosion and overprinting of these ancient systems impedes the direct observation of their tectonic history. However, the basin sedimentary records are more complete, and provide additional insights into the timing and style of the mountain building events. In this study, we employ ~90 1D basin models, ~30 inverse flexural models, isopachs, and paleogeographic maps to better understand the Paleozoic history of North America.
Request a visit from Kurt W. Rudolph!
The Betic hinterland, in the westernmost Mediterranean, constitutes a unique example of a stack of metamorphic units. Using a three-dimensional model for the crustal structure of the Betics-Rif area this talk will address the role of crustal flow simultaneously to upper-crustal low-angle faulting in the origin and evolution of the topography.
President Biden has laid out a bold and ambitious goal of achieving net-zero carbon emissions in the United States by 2050. The pathway to that target includes cutting total greenhouse gas emissions in half by 2030 and eliminating them entirely from the nation’s electricity sector by 2035. The Office of Fossil Energy and Carbon Management will play an important role in the transition to net-zero carbon emissions by reducing the environmental impacts of fossil energy production and use – and helping decarbonize other hard-to abate sectors.
Request a visit from Jennifer Wilcox!