HomeScience Discipline Sedimentology and Stratigraphy

Sedimentology and Stratigraphy

Middle East Blog

Mark your calendars! Don't miss out on this exciting GTW, which builds on the success of the first Carbonate Reservoirs of the Middle East GTW held in Abu Dhabi, UAE in 2015..

American Association of Petroleum Geologists (AAPG)
Explorer Historical Highlights

A few months after the founding of AAPG in early 1917, the first description of the Wolfcamp Formation was published in the University of Texas Bulletin No. 1753 titled “Notes on the Geology of the Glass Mountains” by J. A. Udden, on Sept. 20, 1917.

American Association of Petroleum Geologists (AAPG)
Explorer Emphasis Article

The Next 100 Years: Data management is a crucial component of oil exploration. What does the century ahead look like for Big Data in the oil field?

American Association of Petroleum Geologists (AAPG)
Middle East Blog

The GEO 2018 committee welcomes your abstracts for oral and poster presentations at the 13th Middle Geosciences Conference and Exhibition (GEO 2018) which will take place from 5 — 8 March in Bahrain. Submit today and join the largest gathering of geoscience professionals in the Middle East.

American Association of Petroleum Geologists (AAPG)
Explorer Article

The AAPG Annual Convention and Exhibition will feature a variety of field trips that will bookend the meeting, spanning from March 26 to April 8.

American Association of Petroleum Geologists (AAPG)
Explorer Emphasis Article

Last year, the extraordinarily high quality of the technical program was the talk of the AAPG Annual Convention and Exhibition in Calgary, and this was at an ACE with plenty of high points to talk about. The technical program for the 2017 ACE in Houston promises to be even better than last year’s.

American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

Rock-Eval hydrogen index (HI) is often used to compare relative maturities of a source horizon across a basin. Usually, there are several measurements from the source horizon at a single well, and the mean hydrogen index is calculated, or the S2 is plotted against TOC. The slope of the best fit line through that data is used as the representative HI for that well (sometimes referred to as the ‘slope HI ’ methodology). There is a potential flaw in both these methodologies; however, that renders the calculated HI as misleading if the source horizon being examined is not relatively uniform in source quality, vertically in the stratigraphic column. From a geologic perspective, it would be unusual for the source rock quality not to vary vertically in the stratigraphic column. Organic matter input, preservation, dilution, and sediment accumulation rate typically vary in many depositional environments over the millions of years required to create a thick source rock package. Nevertheless, there are source rocks which do display remarkable source-quality uniformity from top to bottom of the stratigraphic package. We have examined source rocks from several basins where the source quality is relatively uniform over the stratigraphic column, and source rocks where the source quality varies greatly over the stratigraphic column. Methodologies to assess hydrogen index at specific wells for the se two scenarios differ. Most geoscientists may not be familiar with why a single technique is not suitable for both these scenarios, or how to correctly use hydrogen index as a relative maturation proxy in the case where source rock quality is not uniform. We will demonstrate how to determine if your source rock quality is uniform or varied relative to HI over the stratigraphic column, and how to assign a hydrogen index to the different source facies when that source rock quality is not uniform. Further we will illustrate how to estimate the original hydrogen index of the different source facies and assign each a transformation ratio. The transformation ratio is a better proxy for relative maturity, since different source facies may have different present-day hydrogen indices, but their present-day transformation ratio should be quite similar.

Show more
American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

The driving forces for conventional accumulations (structural or stratigraphic traps) are Forces of Buoyancy which are due to differences in densities of hydrocarbons and water. In contrast, the driving forces for unconventional tight accumulations are Forces of Expulsion which are produced by high pressures. That is an enormous difference and creates unconventional petroleum systems that are characterized by very different and distinctive characteristics. The Force of Expulsion pressures are created by the significant increase in volume when any of the three main kerogen types are converted to hydrocarbons. At those conversion times in the burial history, the rocks are already sufficiently tight so the large volumes of generated hydrocarbons cannot efficiently escape through the existing tight pore system, thus creating a permeability bottleneck that produces an overpressured compartment over a large area corresponding to the proper thermal oil and gas maturities for that basin. The forces initially created in these source rocks can only go limited distances into adjacent tight reservoirs (clastics or carbonates) above or below the source. The exact distance will vary depending on the pressure increase, matrix permeability, and fractures of that specific tight reservoir system. In general, the distances are small, in the orders of 10s to 100s of feet for oil and larger for more mobile gas systems. Those exact distance numbers are subject to ongoing investigations.   A plot of the pressure data versus elevation for a given formation is critical in determining whether an accumulation is conventional or unconventional. Conventional accumulations will have hydrocarbon columns of 10s to 100s of feet with the pressure in the hydrocarbons and that in the water equal at the bottom of the accumulation (at the HC-water contact). In contrast, the unconventional accumulations will show HC column heights of 1000s of feet with the pressure in the hydrocarbon phase and the water phase being the same at the top of the accumulation (at the updip transition zone). Those significant differences are critical for understanding and differentiating these two play types. Because the system is a pore throat bottleneck with very little or minimum lateral migration, the type of hydrocarbon s are closely tied to the thermal maturity required to generate those hydrocarbons. Thus the play concept begins with two important geochemical considerations: (1) where are the source rocks and what are the kerogen types and organic richness (TOC), and (2 ) where are they mature in the basin for oil, condensate, and gas in the basin. These parameters will very quickly define the fairway for the play. Then one has to add the critical information on the reservoirs themselves: composition (brittleness), thickness, and reservoir quality (matrix porosity and permeability). In summary, these tight unconventional petroleum systems (1) are dynamic , and (2) create a regionally inverted petroleum system with water over oil over condensate over gas for source rocks wit h Type I or II kerogen types.

Show more
American Association of Petroleum Geologists (AAPG)
Explorer Article

The AAPG Annual Convention and Exhibition will feature a variety of field trips that will bookend the meeting, spanning from March 26 to April 8.

American Association of Petroleum Geologists (AAPG)
Explorer Emphasis Article

The eastern Mediterranean Sea could become the hottest offshore play in the Middle East area, depending on the outcome of a key exploration attempt later this year.

American Association of Petroleum Geologists (AAPG)
VG Abstract

The carbonate sequences that were deposited in the now exhumed Tethyan Ocean influence many aspects of our lives today, either by supplying the energy that warms our homes and the fuel that powers our cars or providing the stunning landscapes for both winter and summer vacations. They also represent some of the most intensely studied rock formations in the world and have provided geoscientists with a fascinating insight into the turbulent nature of 250 Million years of Earth’s history. By combining studies from the full range of geoscience disciplines this presentation will trace the development of these carbonate sequences from their initial formation on the margins of large ancient continental masses to their present day locations in and around the Greater Mediterranean and Near East region. The first order control on growth patterns and carbonate platform development by the regional plate-tectonic setting, underlying basin architecture and fluctuations in sea level will be illustrated. The organisms that contribute to sequence development will be revealed to be treasure troves of forensic information. Finally, these rock sequences will be shown to contain all the ingredients necessary to form and retain hydrocarbons and the manner in which major post-depositional tectonic events led to the formation of some of the largest hydrocarbon accumulations in the world will be demonstrated.

Show more

Request a visit from Keith Gerdes!

American Association of Petroleum Geologists (AAPG)
DL Abstract

As oil and gas exploration and production occur in deeper basins and more complex geologic settings, accurate characterization and modeling of reservoirs to improve estimated ultimate recovery (EUR) prediction, optimize well placement and maximize recovery become paramount. Existing technologies for reservoir characterization and modeling have proven inadequate for delivering detailed 3D predictions of reservoir architecture, connectivity and rock quality at scales that impact subsurface flow patterns and reservoir performance. Because of the gap between the geophysical and geologic data available (seismic, well logs, cores) and the data needed to model rock heterogeneities at the reservoir scale, constraints from external analog systems are needed. Existing stratigraphic concepts and deposition models are mostly empirical and seldom provide quantitative constraints on fine-scale reservoir heterogeneity. Current reservoir modeling tools are challenged to accurately replicate complex, nonstationary, rock heterogeneity patterns that control connectivity, such as shale layers that serve as flow baffles and barriers.

Show more

Request a visit from Tao Sun!

American Association of Petroleum Geologists (AAPG)
DL Abstract

Engineering of wind farms, development of carbon sequestration projects in shelfal waters, the proliferation of communication cables that connect the world, all of these things suggest that it is time to re-examine what we know about shelf processes both updip-to-downdip and along shoreline, and the influence of shelf processes on erosion and transport of sediments.

Request a visit from Lesli Wood!

American Association of Petroleum Geologists (AAPG)

Related Interests

See Also ...