Global Oil Benchmark Tops $90 for First Time Since 2014 - 27 January, 2022 07:35 AM
LA Bans New Oil and Gas Wells, Will Phase-Out Over Five Years - 27 January, 2022 07:31 AM
Future of Gulf of Mexico Oil and Gas Drilling Splits U.S. House Panel Along Party Lines - 27 January, 2022 07:30 AM
Oil Prices End Higher on Global Threats to Supplies as Traders Weigh Stock Market Volatility - 26 January, 2022 07:33 AM
U.S. Clears Second-Largest Ever Loan of Oil From Strategic Reserve - 26 January, 2022 07:32 AM
Structural Geology and our Future Call for Abstracts
Expires in 3 days
Europe Regional Conference 2022 Call for Abstracts
Expires in 4 days
Stratigraphic and Reservoir Challenges with Triassic Plays in North Europe - Call for Abstracts
Expires in 6 days
Carbonate Sequences and Reservoirs Call for Abstracts
Expires in 50 days
Basin Evolution and Prospectivity in Flexural and Rift Basins Call for Abstracts
Expires in 78 days
AAPG awards are presented to individuals recognizing their service to the profession, the science, the Association and the public. Heading the list is Gerald M. Friedman who has been named to receive the Sidney Powers Memorial Award, AAPG's highest honor.
Nuclear magnetic resonance wireline tools have become an important part of many companies' operations. How important? Case studies from wells in the Gulf of Mexico and on the Gulf Coast illustrate just what NMR can add to the overall downhole picture.
Real-time well analysis that takes place during actual drilling helps manage deviations that are too small to detect with seismic data, but could interefere with drilling. 1998 Pacific Section H. Victor Church awarded for a poster session on a project in Ventura, California, shares the 'Advantages of Real Time LWD Dipmeter Data.'
How much effort is going toward improving recover from already producting fields? A survey taken of nearly 300 AAPG members in five U.S. cities by the AAPG Reservoir Development Committee may surprise readers with their answers.
This article is the first in a series about integrated disciplinary teams. Though not a new concept to the industry, the explosion of new technology such as 3-D and 4-D seismic, reservoir simulation and a host of drilling innovations has created the need for technical staff from several geoscience and engineering disciplines to work together.
Rare is the financier who can look at a 2-D map and visualize the pertinent data in three dimensions. But when a 3-D model is available, the folks who deal with capital can better understand complex geological concepts by actually seeing fault closure, stratigraphic traps and such, thereby leaving less to the imagination.
Oil is produced from the Manderson Field, in Wyoming's Big Horn County, from a fracture system with possible significant lateral connectivity -- so characterizing the fractures in this field is of great importance.
Three-dimensional modeling and reservoir visualization tools are increasingly used to add value to California heavy oil projects.
Date: 25 September 2022
Time: 8:30am - 4:30pm
Course Instructor: Alberto Ortiz, Net Zero Carbon Solutions
Registration Fee: $530
Registration Deadline: 25 August 2022
Short Course registration is included as part of the GTW registration process.
The petrophysical characterization of unconventional shale-type reservoirs has been one of the most approached and relevant issues in the oil and gas industry in the last 8 years. This is because after several years, the operating companies comprehended the impact that an appropriate characterization of the reservoir has on their project economics.
Another reason for this were the technical obstacles encountered in the measurement of petrophysical properties such as porosity, saturation and permeability due to the complexity of this type of reservoir. Obstacles and limitations not only relate to laboratory measurements but also to electrical logging tools.
As a consequence of this, nowadays, petrophysical evaluations in this type of reservoir do not have standardized workflows established and accepted worldwide as is the case for conventional reservoirs. This motivates the professionals involved in the study of this type of rocks to dedicate a lot of effort in the validation of the technologies used, and sometimes it is difficult for them to understand the results, the evaluation of uncertainties and the construction of petrophysical models with results and representative parameters of the subsurface conditions.
This course will focus on providing key knowledge for a better characterization of the rock both in the aspects related to the matrix represented by mineralogy and kerogen as well as the fluids present. The approach will be based on the convergence of different technologies that support and give robustness to the results.
The contents that will be provided will include laboratory testing techniques and petrophysical evaluation of electrical well logs for unconventional shale-type reservoirs. The contents provided will cover a variety of studies based on the most diverse physical principles that will include the latest advances and techniques used in the industry such as Nuclear Magnetic Resonance, Spectroscopy, Dielectric, Computed axial tomography and SEM images, among others.
As a result of this, attendees will have tools that allow a more comprehensive understanding of this type of rocks, a better assessment of the uncertainty of the model used and the necessary steps to improve its precision, accelerating the learning curve. The contents provided will also allow knowing the critical parameters that must be taken into account for the definition of areas to be drilled.
Reservoir heterogeneity characterization from outcrops to lab data and electrical logging.
Most relevant unconventional plays of the world. Main characteristics.
The petrophysical model. Components and definitions, construction, uncertainties, strengths and weakness.
Lab studies: porosity, saturation, mineralogy, organic geochemistry and permeability.
Electrical logging response on unconventional shale plays: triple combo, NMR, NMR T1T2, nuclear spectroscopy, spectral GR, dielectric.
The effect of maturity on kerogen.
Challenges on water saturation calculation.
Data integration. Interpretation workflows and core calibration.
The following short course option was developed for geology and geophysics students that have not had much exposure to how geoscience is applied in industry. It can be tailored for undergraduate juniors and seniors or graduate students. The agenda can be modified to meet specific needs and time constraints. Contact the presenter to discuss options.
Request a visit from Fred Schroeder!
In comparison with the known boundary conditions that promote salt deformation and flow in sedimentary basins, the processes involved with the mobilization of clay-rich detrital sediments are far less well established. This talk will use seismic examples in different tectonic settings to document the variety of shale geometries that can be formed under brittle and ductile deformations.
Request a visit from Juan I. Soto!
The Betic hinterland, in the westernmost Mediterranean, constitutes a unique example of a stack of metamorphic units. Using a three-dimensional model for the crustal structure of the Betics-Rif area this talk will address the role of crustal flow simultaneously to upper-crustal low-angle faulting in the origin and evolution of the topography.
Hydraulic fracturing has been around for decades. This talk describes some of the first applications of the technology, how it developed over time, and our current understanding of its impacts with some discussion of both water and earthquake hazards.
Request a visit from Sherilyn Williams-Stroud!
Microseismicity induced by hydraulic fracture stimulation of a horizontal well was mapped with a near-surface buried array. Distinct linear trends of events were not parallel to the direction of fast shear wave polarization measured in the reservoir with a crossed-dipole anisotropy tool. Analysis of core from a nearby well revealed numerous calcite-filled fractures that did not induce shear wave polarization, but did significantly impact the failure behavior of the reservoir rock during the stimulation treatment. Hydraulic fracture simulation with DFN modeling and source mechanism analysis supports the interpretation of reactivated existing fractures rather than the formation of hydraulically-induced tensile fractures.
This is a less-technical education topic. It can be condensed to an hour or given as 2 two-hour sessions. It stresses selected controversial aspects of fracking that touch some combination of environment and economics and includes a short video of how fracking is done.
Request a visit from David Weinberg!
Production from unconventional petroleum reservoirs includes petroleum from shale, coal, tight-sand and oil-sand. These reservoirs contain enormous quantities of oil and natural gas but pose a technology challenge to both geoscientists and engineers to produce economically on a commercial scale. These reservoirs store large volumes and are widely distributed at different stratigraphic levels and basin types, offering long-term potential for energy supply. Most of these reservoirs are low permeability and porosity that need enhancement with hydraulic fracture stimulation to maximize fluid drainage. Production from these reservoirs is increasing with continued advancement in geological characterization techniques and technology for well drilling, logging, and completion with drainage enhancement. Currently, Australia, Argentina, Canada, Egypt, USA, and Venezuela are producing natural gas from low permeability reservoirs: tight-sand, shale, and coal (CBM). Canada, Russia, USA, and Venezuela are producing heavy oil from oilsand. USA is leading the development of techniques for exploring, and technology for exploiting unconventional gas resources, which can help to develop potential gas-bearing shales of Thailand.
The main focus is on source-reservoir-seal shale petroleum plays. In these tight rocks petroleum resides in the micro-pores as well as adsorbed on and in the organics. Shale has very low matrix permeability (nano-darcies) and has highly layered formations with differences in vertical and horizontal properties, vertically non-homogeneous and horizontally anisotropic with complicate natural fractures. Understanding the rocks is critical in selecting fluid drainage enhancement mechanisms; rock properties such as where shale is clay or silica rich, clay types and maturation , kerogen type and maturation, permeability, porosity, and saturation. Most of these plays require horizontal development with large numbers of wells that require an understanding of formation structure, setting and reservoir character and its lateral extension.
The quality of shale-gas resources depend on thickness of net pay (>100 m), adequate porosity (>2%), high reservoir pressure (ideally overpressure), high thermal maturity (>1.5% Ro), high organic richness (>2% TOC), low in clay (<50%), high in brittle minerals (quartz, carbonates, feldspars), and favourable in-situ stress.
During the past decade, unconventional shale and tight-sand gas plays have become an important supply of natural gas in the US, and now in shale oil as well. As a consequence, interest to assess and explore these plays is rapidly spreading worldwide. The high production potential of shale petroleum resources has contributed to a comparably favourable outlook for increased future petroleum supplies globally.
Application of 2D and 3D seismic for defining reservoirs and micro seismic for monitoring fracturing, measuring rock properties downhole (borehole imaging) and in laboratory (mineralogy, porosity, permeability), horizontal drilling (downhole GPS), and hydraulic fracture stimulation (cross-linked gel, slick-water, nitrogen or nitrogen foam) is key in improving production from these huge resources with low productivity factors.
Request a visit from Ameed Ghori!
The following short course option was developed for geology and geophysics students that have not had much exposure to how geoscience is applied in industry. It can be tailored for undergraduate juniors and seniors or graduate students. The agenda can be modified to meet specific needs and time constraints.
Ticks and clicks 637789224185870167
How to Join
100 Years Anniversary
About AAPG Divisions
DEG: Division of Environmental Geosciences
DPA: Division of Professional Affairs
EMD: Energy Minerals Division
PSGD: Petroleum Structure and Geomechanics Division
Geosciences Technology Workshops (GTW)
In Person Training
Visiting Geoscientist Program
Asia Pacific Region
Latin America Region
Middle East Region
Imperial Barrel Award
Africa (Lagos) Office
Asia Pacific (Singapore) Office
Europe (London) Office
Latin America (Bogotá) Office
Middle East (Dubai) Office
Purpose / Mission
Constitution & Bylaws
Access Online Journals
Review Site Activity
Upgrade Member Level
Annual Convention and Exhibition
International Conference and Exhibition
Unconventional Resources Technology Conference
Arctic Technology Conference
Imperial Barrel Award
Books - Buy one
Imperial Barrel Award
Renew Sponsored Dues
Search and Discovery
Visiting Geoscientist Program
LinkedIn | Facebook | Twitter | YouTube
Email: | Other Contact Info