Home

Environmental

Oil Rises on U.S. Crude Draw and Iraqi Supply Risks - 31 March, 2023 07:30 AM

The Old World Order for Crude Oil is Disappearing - 31 March, 2023 07:30 AM

House GOP Approves Broad Bill to 'Unleash' American Energy - 31 March, 2023 07:30 AM

Biden Admin. Sells Oil and Gas Leases in Gulf of Mexico - 31 March, 2023 07:30 AM

Refiner Valero Seeks U.S. Approval to Import Venezuelan Oil - 31 March, 2023 07:30 AM

News in Review ...

06 Apr

Low Resistivity Reservoirs: Path to Explore, Discover and Develop Call for Abstracts Expires in 4 days

litutmMedium

View All Deadlines ...

Stratigraphy / Sedimentology Technical Interest Group (TIG)

Bulletin E-P Note

Athabasca oil sands: Megatrap restoration and charge timing

The petroleum trap for the Athabasca oil sands has remained elusive because it was destroyed by flexural loading of the Western Canada Sedimentary Basin during the Late Cretaceous and Paleocene. The original trap extent is preserved because the oil was biodegraded to immobile bitumen as the trap was being charged during the Late Cretaceous. Using well and outcrop data, it is possible to reconstruct the Cretaceous overburden horizons beyond the limit of present-day erosion. Sequential restoration of the reconstructed horizons reveals a megatrap at the top of the Wabiskaw-McMurray reservoir in the Athabasca area at 84 Ma (late Santonian). The megatrap is a four-way anticline with dimensions 285 x 125 km (177 x 78 mi) and maximum amplitude of 60 m (197 ft). The southeastern margin of the anticline shows good conformance to the bitumen edge for 140 km (87 mi). To the northeast of the anticline, bitumen is present in a shallower trap domain in what is interpreted to be an onlap trap onto the Canadian Shield; leakage along the onlap edge is indicated by tarry bitumen outliers preserved in basement rocks farther to the northeast. Peripheral trap domains that lie below the paleospillpoint, in northern, southern, and southwestern Athabasca, and Wabasca, are interpreted to represent a late charge of oil that was trapped by bitumen already emplaced in the anticline and the northeastern onlap trap. This is consistent with kimberlite intrusions containing live bitumen, which indicate that the northern trap domain was charged not before 78 Ma. The trap restoration has been tested using bitumen-water contact well picks. The restored picks fall into groups that are consistent both with the trap domains determined from the top reservoir restoration and the conceptual charge model in which the four-way anticline was filled first, followed by the northeastern onlap trap, and then the peripheral trap domains.

Added on 28 February, 2014

Explorer Historical Highlights By Michael Morton

A Gusher at Baba Gurgur

“One man was at the head waters of the River Amazon among the headshrinkers when he was recalled to come to Iraq; another came from Argentina, another from Mexico, still another had been in Romania, one in Indo-China, several in Venezuela and the East Indies.”

Added on 01 February, 2014

Explorer Article By Jeff Ottmann,Kevin Bohacs

Conventional Reservoirs Hold Keys to the 'Un's

'Breakthrough elegance': ExxonMobil geologists Jeff Ottmann and Kevin Bohacs shared their highly-coveted knowledge on sweet spots and producibility thresholds at a recent Geosciences Technology Workshop on Unconventional Reservoir Quality.

Added on 01 February, 2014

Bulletin Article

Sequence stratigraphy of the Eocene turbidite reservoirs in Albacora field, Campos Basin, offshore Brazil

This article describes a 250-m (820-ft)-thick upper Eocene deep-water clastic succession. This succession is divided into two reservoir zones: the lower sandstone zone (LSZ) and the upper sandstone zone, separated by a package of pelitic rocks with variable thickness on the order of tens of meters. The application of sequence-stratigraphic methodology allowed the subdivision of this stratigraphic section into third-order systems tracts. The LSZ is characterized by blocky and fining-upward beds on well logs, and includes interbedded shale layers of as much as 10 m (33 ft) thick. This zone reaches a maximum thickness of 150 m (492 ft) and fills a trough at least 4 km (2 mi) wide, underlain by an erosional surface. The lower part of this zone consists of coarse- to medium-grained sandstones with good vertical pressure communication. We interpret this unit as vertically and laterally amalgamated channel-fill deposits of high-density turbidity flows accumulated during late forced regression. The sandstones in the upper part of this trough are dominantly medium to fine grained and display an overall fining-upward trend. We interpret them as laterally amalgamated channel-fill deposits of lower density turbidity flows, relative to the ones in the lower part of the LSZ, accumulated during lowstand to early transgression. The pelitic rocks that separate the two sandstone zones display variable thickness, from 35 to more than 100 m (115–>328 ft), indistinct seismic facies, and no internal markers on well logs, and consist of muddy diamictites with contorted shale rip-up clasts. This section is interpreted as cohesive debris flows and/or mass-transported slumps accumulated during late transgression. The upper sandstone zone displays a weakly defined blocky well-log signature, where the proportion of sand is higher than 80%, and a jagged well-log signature, where the sand proportion is lower than 60%. The high proportions of sand are associated with a channelized geometry that is well delineated on seismic amplitude maps. Several depositional elements are identified within this zone, including leveed channels, crevasse channels, and splays associated with turbidity flows. This package is interpreted as the product of increased terrigenous sediment supply during highstand normal regression.

Added on 31 January, 2014

Bulletin Article

Prediction of channel connectivity and fluvial style in the flood-basin successions of the Upper Permian Rangal coal measures (Queensland)

Predicting the presence and connectivity of reservoir-quality facies in otherwise mud-prone fluvial overbank successions is important because such sand bodies can potentially provide connectivity between larger neighboring sand bodies. This article addresses minor channelized fluvial elements (crevasse-splay and distributary channels) and attempts to predict the connectivity between such sand bodies in two interseam packages of the Upper Permian Rangal Coal Measures of northeastern Australia. Channel-body percent as measured in well logs was 2% in the upper (Aries-Castor) interseam and 17% in the lower (Castor-Pollux) interseam. Well spacing were too great to allow accurate correlation of channel bodies. The Ob River, Siberia, was used as a modern analog to supply planform geometric measurements of splay and distributary channels so that stochastic modeling of channel bodies was possible. The resulting models demonstrated that (1) channel-body connectivity is more uniform between minor distributary channels than between crevasse-splay channels; (2) relatively good connectivity is seen in proximal positions in splays but decreases distally from the source as channel elements diverge; and (3) connectivity tends to be greater down the axis of splays, with more isolated channel bodies occurring at the margins.

Added on 31 January, 2014

Energy Policy Blog By Edith Allison

California Offshore Fracking Controversy

January 8 the Environmental Protection Agency (EPA) issued a new rule on offshore hydraulic fracturing that takes effect on March 1. The rule adds additional effluent limits and monitoring requirements. Operators would be required to maintain an inventory of chemicals used in drilling operations and report any released into surrounding waters. The new EPA rule applies only to existing development and production platforms, and new exploratory drilling operations in federal waters off the Santa Barbara coast. There are 23 existing production platforms in California federal waters.

Added on 13 January, 2014

Explorer Article By Louise Durham

Explorers Focus on Deepwater Reservoirs

Shale may be the reservoir du jour, but a wide range of conventional reservoirs still hold promise in diverse regions throughout the world.

Added on 01 January, 2014

Bulletin Article

Electrical and flow properties of highly heterogeneous carbonate rocks

In reservoir engineering, hydrodynamic properties can be estimated from downhole electrical data using heuristic models (e.g., Archie and Kozeny-Carman's equations) relating electrical conductivity to porosity and permeability. Although proven to be predictive for many sandstone reservoirs, the models mostly fail when applied to carbonate reservoirs that generally display extremely complex pore network structures. In this article, we investigate the control of the three-dimensional (3-D) geometry and morphology of the pore network on the electrical and flow properties, comparing core-scale laboratory measurements and 3-D x-ray microtomography image analysis of samples from a Miocene reefal carbonate platform located in Mallorca (Spain). The results show that micrometer- to centimeter-scale heterogeneities strongly influence the measured macroscopic physical parameters that are then used to evaluate the hydrodynamic properties of the rock, and therefore, existing models might not provide accurate descriptions because these heterogeneities occur at scales smaller than those of the integration volume of the borehole geophysical methods. However, associated with specific data processing, 3-D imagery techniques are a useful and probably unique mean to characterize the rock heterogeneity and, thus, the properties variability.

Added on 01 January, 2014

Bulletin Article

Salt structures and hydrocarbon accumulations in the Tarim Basin, northwest China

The Tarim Basin is one of the most important hydrocabon-bearing evaporite basins in China. Four salt-bearing sequences, the Middle and Lower Cambrian, the Mississippian, the Paleogene, and the Neogene, have various thickness and areal distribution. They are important detachment layers and intensely affect the structural deformation in the basin. The Kuqa depression is a subordinate structural unit with abundant salt structures in the Tarim Basin. Salt overthrusts, salt pillows, salt anticlines, salt diapirs, and salt-withdrawal basins are predominant in the depression. Contraction that resulted from orogeny played a key function on the formation of salt structures. Growth strata reveal that intense salt structural deformation in the Kuqa depression occurred during the Himalayan movement from Oligocene to Holocene, with early structural deformation in the north and late deformation in the south. Growth sequences also record at least two phases of salt tectonism. In the Yingmaili, Tahe, and Tazhong areas, low-amplitude salt pillows are the most common salt structures, and these structures are commonly accompanied by thrust faults. The faulting and uplifting of basement blocks controlled the location of salt structures. The differences in the geometries of salt structures in different regions show that the thickness of the salt sequences has an important influence on the development of salt-cored detachment folds and related thrust faults in the Tarim Basin. Salt sequences and salt structures in the Tarim Basin are closely linked to hydrocarbon accumulations. Oil and gas fields have been discovered in the subsalt, intrasalt, and suprasalt strata. Salt deformation has created numerous potential traps, and salt sequences have provided a good seal for the preservation of hydrocarbon accumulations. Large- and small-scale faults related with salt structures have also given favorable migration pathways for oil and gas. When interpreting seismic profiles, special attention needs to be paid to the clastic and carbonate interbeds within the salt sequences because they may lead to incorrect structural interpretation. In the Tarim Basin, the subsalt anticlinal traps are good targets for hydrocarbon exploration.

Added on 31 December, 2013

Bulletin Article

Acoustic nonlinear full-waveform inversion on an outcrop-based detailed geological and petrophysical model (Book Cliffs, Utah)

Analog outcrops are commonly used to develop predictive reservoir models and provide quantitative parameters that describe the architecture and facies distribution of sedimentary deposits at a subseismic scale, all of which aids exploration and production strategies. The focus of this study is to create a detailed geological model that contains realistic reservoir parameters and to apply nonlinear acoustic full-waveform prestack seismic inversion to this model to investigate whether this information can be recovered and to examine which geological features can be resolved by this process. Outcrop data from the fluviodeltaic sequence of the Book Cliffs (Utah) are used for the geological and petrophysical two-dimensional model. Eight depositional environments are populated with average petrophysical reservoir properties adopted from a North Sea field. These units are termed lithotypes here. Synthetic acoustic prestack seismic data are then generated with the help of an algorithm that includes all internal multiples and transmission effects. A nonlinear acoustic full-waveform inversion is then applied to the synthetic data, and two media parameters, compressibility (inversely related to the square of the compressional wave velocity vP) and bulk density, ρ, are recovered at a resolution higher than the shortest wavelength in the data. This is possible because the inversion exploits the nonlinear nature of the relationship between the recorded data and the medium contrast properties. In conventional linear inversion, these details remain masked by the noise caused by the nonlinear effects in the data. Random noise added to the data is rejected by the nonlinear inversion, contributing to improved spatial resolution. The results show that the eight lithotypes can be successfully recovered at a subseismic scale and with a low degree of processing artifacts. This technique can provide a useful basis for more accurate reservoir modeling and field development planning, allowing targeting of smaller reservoir units such as distributary channels and lower shoreface sands.

Added on 31 December, 2013

Workshop

Khobar, Saudi Arabia

Monday, 8 May – Wednesday, 10 May 2023, 8:00 a.m.–5:00 p.m.

2nd Edition: AAPG/SPWLA Low Resistivity Reservoirs: Path to Explore, Discover and Develop

“Wait! There is a short cut. Turn right from here”. That’s probably the sound of an electric current bypassing the resistive hydrocarbons, in a maze or network of porous media, when traveling from transmitter to receiver. This workshop will serve the participants need with the up to date advancements in describing and characterizing low resistivity and low contrast pay, and eventually, maximize resources.

Added on 15 November, 2022

VG Abstract By Keith Gerdes

Tethyan Carbonates - Linking Tropical Seas and Crashing Plates to Some of the Largest Oil and Gas Fields in the World

The carbonate sequences that were deposited in the now exhumed Tethyan Ocean influence many aspects of our lives today, either by supplying the energy that warms our homes and the fuel that powers our cars or providing the stunning landscapes for both winter and summer vacations. They also represent some of the most intensely studied rock formations in the world and have provided geoscientists with a fascinating insight into the turbulent nature of 250 Million years of Earth’s history. By combining studies from the full range of geoscience disciplines this presentation will trace the development of these carbonate sequences from their initial formation on the margins of large ancient continental masses to their present day locations in and around the Greater Mediterranean and Near East region. The first order control on growth patterns and carbonate platform development by the regional plate-tectonic setting, underlying basin architecture and fluctuations in sea level will be illustrated. The organisms that contribute to sequence development will be revealed to be treasure troves of forensic information. Finally, these rock sequences will be shown to contain all the ingredients necessary to form and retain hydrocarbons and the manner in which major post-depositional tectonic events led to the formation of some of the largest hydrocarbon accumulations in the world will be demonstrated.

Request a visit from Keith Gerdes!

Added on 24 August, 2015

Environmental

See Also ...

STAY CONNECTED: