Explorer Article
By Susan Eaton
Energized by the recent Statoil ASA-operated Bay du Nord light oil discovery in Newfoundland’s offshore Flemish Pass Basin, earth scientists are gearing up to host the fourth Atlantic Realm Conjugate Margins Conference in St. John’s, Newfoundland, Aug. 20-22.
American Association of Petroleum Geologists (AAPG)
Added on 01 March, 2014
Explorer Article
By Susan Eaton
Statoil’s recent discoveries in the Canadian North Atlantic promises a rebirth of the Newfoundland and Labrador offshore oil industry.
American Association of Petroleum Geologists (AAPG)
Added on 01 March, 2014
Bulletin Article
Interpretation of seismic data from the Sorvestsnaget Basin, southwest Barents Sea, demonstrates gradual middle Eocene basin infilling (from the north) generated by southward-prograding shelf-margin clinoforms. The basin experienced continued accommodation development during the middle Eocene because of differential subsidence caused by the onset of early Eocene sea-floor spreading in the Norwegian-Greenland Sea, faulting, salt movement, and different tectonic activity between the Sorvestsnaget Basin and Veslemoy high. During this time, the margin shows transformation from an initially high-relief margin to a progradation in the final stage. The early stage of progradation is characterized by the establishment of generally oblique clinoform shifts creating a flat shelf-edge trajectory that implies a gentle falling or stable relative sea level and low accommodation-to-sediment supply ratio (1) in the topsets. During the early stage of basin development, the high-relief margin, narrow shelf, stable or falling relative sea level, seismicity, and presumably high sedimentation rate caused accumulation of thick and areally extensive deep-water fans. Seismic-scale sandstone injections deform the fans.
A fully prograding margin developed when the shelf-to-basin profile lowered, apparently because of increased subsidence of the northern part. This stage of the basin development is generally characterized by the presence of sigmoid clinoform shifts creating an ascending shelf-edge trajectory that is implying steady or rising relative sea level with an accommodation-to-sediment supply ratio of greater than 1, implying sand accumulation on the shelf. This study suggests that some volume of sand was transported into the deep water during relative sea level rise considering the narrow shelf and inferred high rates of sediment supply.
Show more
American Association of Petroleum Geologists (AAPG)
Added on 28 February, 2014
Bulletin Article
We use three-dimensional seismic reflection data and new map-based structural restoration methods to define the displacement history and characteristics of a series of tear faults in the deep-water Niger Delta. Deformation in the deep-water Niger Delta is focused mostly within two fold-and-thrust belts that accommodate downdip shortening produced by updip extension on the continental shelf. This shortening is accommodated by a series of thrust sheets that are locally cut by strike-slip faults. Through seismic mapping and interpretation, we resolve these strike-slip faults to be tear faults that share a common detachment level with the thrust faults. Acting in conjunction, these structures have accommodated a north –south gradient in westward-directed shortening. We apply a map-based restoration technique implemented in Gocad to restore an upper stratigraphic horizon of the late Oligocene and use this analysis to calculate slip profiles along the strike-slip faults. The slip magnitudes and directions change abruptly along the lengths of the tear faults as they interact with numerous thrust sheets. The discontinuous nature of these slip profiles reflects the manner in which they have accommodated differential movement between the footwall and hanging-wall blocks of the thrust sheets. In cases for which the relationship between a strike-slip fault and multiple thrust faults is unclear, the recognition of this type of slip profile may distinguish thin-skinned tear faults from more conventional deep-seated, throughgoing strike-slip faults.
Show more
American Association of Petroleum Geologists (AAPG)
Added on 28 February, 2014
Explorer Geophysical Corner
By Rongfeng Zhang,Satinder Chopra
It is no secret that geologists do not fully trust all the events shown in pretty seismic pictures.
American Association of Petroleum Geologists (AAPG)
Added on 01 February, 2014
Bulletin Article
This article describes a 250-m (820-ft)-thick upper Eocene deep-water clastic succession. This succession is divided into two reservoir zones: the lower sandstone zone (LSZ) and the upper sandstone zone, separated by a package of pelitic rocks with variable thickness on the order of tens of meters. The application of sequence-stratigraphic methodology allowed the subdivision of this stratigraphic section into third-order systems tracts.
The LSZ is characterized by blocky and fining-upward beds on well logs, and includes interbedded shale layers of as much as 10 m (33 ft) thick. This zone reaches a maximum thickness of 150 m (492 ft) and fills a trough at least 4 km (2 mi) wide, underlain by an erosional surface. The lower part of this zone consists of coarse- to medium-grained sandstones with good vertical pressure communication. We interpret this unit as vertically and laterally amalgamated channel-fill deposits of high-density turbidity flows accumulated during late forced regression. The sandstones in the upper part of this trough are dominantly medium to fine grained and display an overall fining-upward trend. We interpret them as laterally amalgamated channel-fill deposits of lower density turbidity flows, relative to the ones in the lower part of the LSZ, accumulated during lowstand to early transgression.
The pelitic rocks that separate the two sandstone zones display variable thickness, from 35 to more than 100 m (115–>328 ft), indistinct seismic facies, and no internal markers on well logs, and consist of muddy diamictites with contorted shale rip-up clasts. This section is interpreted as cohesive debris flows and/or mass-transported slumps accumulated during late transgression.
The upper sandstone zone displays a weakly defined blocky well-log signature, where the proportion of sand is higher than 80%, and a jagged well-log signature, where the sand proportion is lower than 60%. The high proportions of sand are associated with a channelized geometry that is well delineated on seismic amplitude maps. Several depositional elements are identified within this zone, including leveed channels, crevasse channels, and splays associated with turbidity flows. This package is interpreted as the product of increased terrigenous sediment supply during highstand normal regression.
Show more
American Association of Petroleum Geologists (AAPG)
Added on 31 January, 2014
Bulletin Article
We present a method of using fault displacement-distance profiles to distinguish fault-bend, shear fault-bend, and fault-propagation folds, and use these insights to guide balanced and retrodeformable interpretations of these structures. We first describe the displacement profiles associated with different end-member fault-related folding models, then provide examples of structures that are consistent with these model-based predictions. Natural examples are imaged in high-resolution two- and three dimensional seismic reflection data sets from the Niger Delta, Sichuan Basin, Sierras Pampeanas, and Cascadia to record variations in displacement with distance updip along faults (termed displacement-distance profiles). Fault-bend folds exhibit constant displacement along fault segments and changes in displacement associated with bends in faults, shear fault-bend folds demonstrate an increase in displacement through the shearing interval, and fault-propagation folds exhibit decreasing displacement toward the fault tip. More complex structures are then investigated using this method, demonstrating that displacement-distance profiles can be used to provide insight into structures that involve multiple fault-related folding processes or have changed kinematic behavior over time. These interpretations are supported by comparison with the kinematics inferred from the geometry of growth strata overlying these structures. Collectively, these analyses illustrate that the displacement-distance approach can provide valuable insights into the styles of fault-related folding.
Show more
American Association of Petroleum Geologists (AAPG)
Added on 31 January, 2014
Explorer Geophysical Corner
By Rongfeng Zhang
When we see a rainbow, it is visually appealing – and the natural tendency is to appreciate its aesthetic qualities rather than study it on an analytical basis, as frequency sub-bands decomposed from white light.
American Association of Petroleum Geologists (AAPG)
Added on 01 January, 2014
Explorer Emphasis Article
By Louise Durham
The RMAG/DGS 3-D Seismic Symposium on Feb. 14 will be the 20th anniversary of the annual forum and will feature 3-D seismic sage Alistair Brown as keynote speaker.
American Association of Petroleum Geologists (AAPG)
Added on 01 January, 2014
Explorer Emphasis Article
By Louise Durham
New geosteering tools are helping to drive eye-raising crude oil production levels in the Bakken shale play.
American Association of Petroleum Geologists (AAPG)
Added on 01 January, 2014