Bogdan Michka posted Petroleum Systems Technical Interest Group (TIG... to 2022 Speaker Schedule (PDF) in Petroleum Systems TIG Discussions
No posts yet.
Events Blog

URTeC is headed to Houston, 23-25 July 2018 at the George R. Brown Convention Center. Key exhibit spaces are going fast, reserve your space today before it’s gone. Don't miss the sixth edition of the Unconventional Resources Technology Conference.

American Association of Petroleum Geologists (AAPG)
Learn! Blog

This workshop will bring the attendees up to date with the latest academic and case-studies from the field of advanced surface logging technologies.

American Association of Petroleum Geologists (AAPG)
Explorer Director’s Corner

Just days ago we, here in North America, experienced a full solar eclipse. As daylight turned to twilight in midday, outside temperatures fell, and we witnessed one of the grandest celestial dances as the moon slipped between Earth and sun. Awe and wonder is a natural and human response to such an event.

American Association of Petroleum Geologists (AAPG)
Middle East Blog

The GEO 2018 committee welcomes your abstracts for oral and poster presentations at the 13th Middle Geosciences Conference and Exhibition (GEO 2018) which will take place from 5 — 8 March in Bahrain. Submit today and join the largest gathering of geoscience professionals in the Middle East.

American Association of Petroleum Geologists (AAPG)
Search and Discovery Article

The San Joaquin Basin lies west of the Sierra Nevada Mountains and east of the San Andre as Fault. Tens of kilometers of Mesozoic and Cenozoic sediments, including deep-water organic-rich source rocks, deposited in a forearc setting, comprise the basin and have contributed to a petroleum system that generates more than 70 percent of California 's daily oil production and includes three of the 10 largest oilfields in the United States. Based on a comprehensive 3D petroleum systems model of the San Joaquin basin, published by the USGS in 2008, we further refine the modeling to account for the unique depositional and tectonic history of the basin. Here, we compare various basal heat flow scenarios to model hydrocarbon generation and calibrate the results to available temperature and vitrinite reflectance (Vr) data. We investigate two types of crustal models: a McKenzie-type rift model, and a no-rift static crustal thickness model. Crustal stretching models calculate basal heat flow resulting from stretching/thinning of mantle and crust during initial (syn-rift) and thermal (post-rift) subsidence. This method uses rock matrix radiogenic heat production values. It does not account for transient effects resulting from burial and uplift of the basin fill. The static no-rift model, alternatively, calculates the basal heat flow based on a stable or non-thinning crust and mantle over time. This method uses estimated Uranium (U), Thorium (Th), and Potassium (K) concentrations within the rock material to then calculate the rock matrix heat production. Unlike the rift model, it accounts for the transient effects resulting from burial and uplift of the basin fill, which can have a considerable additional effect on the basal heat flow. Given the low probability of crustal stretching as the starting point for basal heat flow in the San Joaquin Basin and considering the forearc nature of the basin as well as the strong concentration of U, K, and Th in the Sierran granites, we focused on and refined the no-rift models. We manually account for the transitional nature of the San Joaquin basement from hot Sierran granite on the east to cool Franciscan oceanic rocks on the west. Radiogenic heat production from solely continental crust results in models that are too warm and cannot be calibrated to well temperature and Vr data. Solely oceanic models are too cool to match well data. ‘Combined crust’ incorporates a seismically derived suture zone that allows for a transition from oceanic to granitic basement, while the ‘intermediate crust’ mixes oceanic and continental radiogenic heat production. These models generate a good match to well data to the east and westward through the transition zone. Additionally, we are able to calibrate to wells off of the Belridge and Lost Hills structures. On structure wells, however, cannot be calibrated with a crustal conductive heat flow scenario and would require (local) elevated heat flows on the order of 20 mW/m 2. This is not in agreement with the generally cooler underlying oceanic crust and suggests that there might be a different and/or additional source of heat flow. Most likely, basin-scale hydrothermal groundwater flow, both along faults and up-structure, could account for elevated Vr and temperature. Convective heat flow would be an additional overprint or enhancement to conductive basal heat flow.

Show more
American Association of Petroleum Geologists (AAPG)
Europe Blog

Sign up for your place at this two-day Geosciences Technology Workshop (GTW) hosted by AAPG Europe at Vilnius University in the heart of the Lithuanian capital. This workshop will focus on Hydrocarbon Exploration in Lithuania and the Baltic Region and will include 12 technical themes which have been designed to help launch perspectives for increased exploration in this region.

American Association of Petroleum Geologists (AAPG)
Learn! Blog

How does diagenesis affect rock physics? What is the relationship of the burial history to the rock physics? Both have a dramatic impact on the rock physics properties of not only the reservoir, but also the source and seals. Welcome to an interview with Per Avseth, who discusses rock physics and quantitative seismic interpretation. He also talks with us about how developing an effective rock physics model requires the integration of geological, geophysical, geochemical, and petrophysical information.

Show more
American Association of Petroleum Geologists (AAPG)
Explorer Emphasis Article

The Gulf of Mexico Basin is a source of seemingly endless hydrocarbon resources, and just one topic to be explored in the Discovery Thinking Forum at this month’s ICE.

American Association of Petroleum Geologists (AAPG)
Europe Blog

The call for abstracts deadline is quickly approaching! Submit yours by 18 September 2016 to take part in the first Geosciences Technology Workshop (GTW) ever held in Lithuania. The workshop will cover everything from European basin modelling to carbonate sedimentology and offshore developments in the Baltic Sea.

American Association of Petroleum Geologists (AAPG)
Explorer Director’s Corner

Unconventional resources have transformed the global energy landscape. And as this issue hits your mailbox, geoscientists and engineers from around the world are in San Antonio, Texas for the fourth edition of URTeC, the Unconventional Resources Technology Conference from August 1-3.

American Association of Petroleum Geologists (AAPG)
Workshop
Lviv, Ukraine
Tuesday, 31 May – Wednesday, 1 June 2022, 8:00 a.m.–5:00 p.m.

Join us for a workshop where experts will  explore the Carpathian foreland and the Dnieper-Donetsk rift basins with a focus not only on hydrocarbons, but the utilization of geothermal resources, hydrogen exploration and CCUS.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Thursday, 13 December 2012, 12:00 a.m.–12:00 a.m.

The course will review core data, petrophysical comparisons, rock physics modeling (including pseudo logs and mechanical properties).

American Association of Petroleum Geologists (AAPG)
Webinar
Virtual Webinar
Thursday, 2 July 2020, 4:00 p.m.–5:00 p.m.

Presented by Kevin C. Hill, Associate Professor, University of Melbourne Gravity modelling of Australia's southern margin reveals that the initial rift with Antarctica was beneath the current Ceduna Delta. A regional, high-quality seismic traverse from the coast to oceanic crust across the Bight Basin has been assembled and interpreted in detail, then balanced, restored, decompacted, and replaced at paleo-water depths. The Late Cretaceous Ceduna Delta developed above a Late Jurassic-Early Cretaceous rift basin in three stages punctuated by significant pulses of uplift and erosion across areas >100 km wide and with up to 1 km of erosion. The Cenomanian White Pointer delta prograded into deepening water and hence underwent gravitational collapse. This was terminated in the Santonian when the Antarctic margin was pulled out from below, thus supplying heat to a remnant thicker outer margin crust, causing doming and erosion. Importantly, this established the saucer-shaped geometry of the Ceduna Delta that persisted throughout its development, so that any hydrocarbons generated in the southern half of the basin would have migrated towards this outer margin high. The Tiger Formation was deposited in shallow water in a full rift basin prior to breakup, which was followed by regional thermal subsidence. The Hammerhead delta developed on the newly formed passive margin but was terminated by another pulse of uplift and erosion, perhaps associated with a change in plate motion at the end of the Cretaceous. The finite element modelling of this proposed tectonic evolution will test its validity and predict hydrocarbon generation and migration through time.

Show more
American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Thursday, 28 April 2011, 12:00 a.m.–12:00 a.m.

The Niobrara Petroleum System of the U.S. Rocky Mountain Region is a major tight petroleum resource play.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Tuesday, 2 December 2014, 2:00 p.m.–3:00 p.m.

The gas transport in organic-rich shales involves different length-scales, from organic and inorganic pores to macro- and macrofractures. In order to upscale the fluid transport from nanoscale (flow through nanopores) to larger scales (to micro- and macrofractures), multicontinuum methodology is planned to be used.

American Association of Petroleum Geologists (AAPG)
Webinar
Virtual Webinar
Tuesday, 30 June 2020, 1:00 p.m.–2:00 p.m.

Visiting Geoscientist Juan Pablo Lovecchio reviews general aspects of rifting, rifts and passive margin formation and evolution through time, as well as elements of petroleum system development.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Thursday, 10 May 2012, 12:00 a.m.–12:00 a.m.

Recognition and Correlation of the Eagle Ford, Austin Formations in South Texas can be enhanced with High Resolution Biostratigraphy, fossil abundance peaks and Maximum Flooding Surfaces correlated to Upper Cretaceous sequence stratigraphic cycle chart after Gradstein, 2010.

American Association of Petroleum Geologists (AAPG)
Webinar
Virtual Webinar
Wednesday, 12 January 2022, 8:00 a.m.–9:00 a.m.

Using global examples and based on 40 years’ experience in mainstream geology and in Petroleum Systems Analysis, Andrew Pepper will discuss how re-thinking some of our paradigms can open up our minds to new Discovery Thinking in any old or new basin.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Thursday, 23 April 2015, 2:00 p.m.–3:00 p.m.

Recent laboratory studies have revealed previously unknown behaviors in shale gas which unlock secrets of permeability and sweet spots in shale gas reservoirs. The presentation presents the findings and also goes into detail about how the new information can be applied in order to potentially improve recovery in reservoirs.

American Association of Petroleum Geologists (AAPG)
Webinar
Virtual Webinar
Thursday, 27 August 2020, 3:00 p.m.–4:00 p.m.

There are over 300 known active onshore mud volcanoes globally, and many more offshore. Mud volcanoes are subsurface fluid escape features in which high pore pressures drive fluids, gases, and subsurface sediments to the surface. This talk will summarize mud volcanoes around the world and examine mud volcano plumbing systems and their link to petroleum systems.

American Association of Petroleum Geologists (AAPG)
Online e-Symposium
Friday, 20 January 2012, 12:00 a.m.–12:00 a.m.

The Eagle Ford Shale in South Texas is one of the more exciting shale plays in the United States at the current time.

American Association of Petroleum Geologists (AAPG)
VG Abstract

Production from unconventional petroleum reservoirs includes petroleum from shale, coal, tight-sand and oil-sand. These reservoirs contain enormous quantities of oil and natural gas but pose a technology challenge to both geoscientists and engineers to produce economically on a commercial scale. These reservoirs store large volumes and are widely distributed at different stratigraphic levels and basin types, offering long-term potential for energy supply. Most of these reservoirs are low permeability and porosity that need enhancement with hydraulic fracture stimulation to maximize fluid drainage. Production from these reservoirs is increasing with continued advancement in geological characterization techniques and technology for well drilling, logging, and completion with drainage enhancement. Currently, Australia, Argentina, Canada, Egypt, USA, and Venezuela are producing natural gas from low permeability reservoirs: tight-sand, shale, and coal (CBM). Canada, Russia, USA, and Venezuela are producing heavy oil from oilsand. USA is leading the development of techniques for exploring, and technology for exploiting unconventional gas resources, which can help to develop potential gas-bearing shales of Thailand. The main focus is on source-reservoir-seal shale petroleum plays. In these tight rocks petroleum resides in the micro-pores as well as adsorbed on and in the organics. Shale has very low matrix permeability (nano-darcies) and has highly layered formations with differences in vertical and horizontal properties, vertically non-homogeneous and horizontally anisotropic with complicate natural fractures. Understanding the rocks is critical in selecting fluid drainage enhancement mechanisms; rock properties such as where shale is clay or silica rich, clay types and maturation , kerogen type and maturation, permeability, porosity, and saturation. Most of these plays require horizontal development with large numbers of wells that require an understanding of formation structure, setting and reservoir character and its lateral extension. The quality of shale-gas resources depend on thickness of net pay (>100 m), adequate porosity (>2%), high reservoir pressure (ideally overpressure), high thermal maturity (>1.5% Ro), high organic richness (>2% TOC), low in clay (<50%), high in brittle minerals (quartz, carbonates, feldspars), and favourable in-situ stress. During the past decade, unconventional shale and tight-sand gas plays have become an important supply of natural gas in the US, and now in shale oil as well. As a consequence, interest to assess and explore these plays is rapidly spreading worldwide. The high production potential of shale petroleum resources has contributed to a comparably favourable outlook for increased future petroleum supplies globally. Application of 2D and 3D seismic for defining reservoirs and micro seismic for monitoring fracturing, measuring rock properties downhole (borehole imaging) and in laboratory (mineralogy, porosity, permeability), horizontal drilling (downhole GPS), and hydraulic fracture stimulation (cross-linked gel, slick-water, nitrogen or nitrogen foam) is key in improving production from these huge resources with low productivity factors.

Show more

Request a visit from Ameed Ghori!

American Association of Petroleum Geologists (AAPG)

Related Interests

See Also ...