WoodMac: Oil Prices Could Surprise to the Upside with China’s Reopening - 23 March, 2023 07:30 AM
What Soft Skills Should Oil and Gas Workers Possess? - 23 March, 2023 07:30 AM
Discoveries by Equinor and Eni Lead Oil and Gas Stock Roundup - 23 March, 2023 07:30 AM
Atlas Petroleum, Partners Advance Venus Oil Discovery Offshore Equatorial Guinea - 23 March, 2023 07:30 AM
PetroChina Fires Up First Onshore Wind Project to Decarbonize Hydrocarbon Production - 23 March, 2023 07:30 AM
Low Resistivity Reservoirs: Path to Explore, Discover and Develop Call for Abstracts Expires in 14 days
litutmMedium
litutmCampaign
The concept of common stratigraphic framework was previously introduced to construct and cross-validate multilayer static and dynamic petrophysical models by invoking the interactive numerical simulation of well logs both before and after invasion. This article documents the successful implementation of the common stratigraphic framework concept to examine and quantify the effects of mud-filtrate invasion on apparent resistivity, nuclear, and magnetic resonance logs acquired in the San Martin, Cashiriari, and Pagoreni gas fields in Camisea, Peru. Conventional petrophysical interpretation methods yield abnormally high estimates of water saturation in some of the reservoir units that produce gas with null water influx. Such an anomalous behavior is caused by relatively low values of deep apparent electrical resistivity and has otherwise been attributed to the presence of clay-coating grains and/or electrically conductive grain minerals coupled with fresh connate water. Concomitantly, electrical resistivity logs exhibit substantial invasion effects as evidenced by the variable separation of apparent resistivity curves (both logging-while-drilling and wireline) with multiple radial lengths of investigation. In extreme cases, apparent resistivity logs stack because of very deep invasion. We diagnose and quantify invasion effects on resistivity and nuclear logs with interactive numerical modeling before and after invasion. The assimilation of such effects in the interpretation consistently decreases previous estimates of water saturation to those of irreducible water saturation inferred from core data. We show that capillary pressure effects are responsible for the difference in separation of apparent resistivity curves in some of the reservoir units. This unique field study confirms that well logs should be corrected for mud-filtrate invasion effects before implementing arbitrary shaly sand models and parameters thereof in the calculation of connate-water saturation.
Although conventional reservoirs dominate the Bohai Basin, China, a new type of sandstone reservoir also exists in the Dongpu depression that has a low matrix porosity (tight) in which natural fractures govern both permeability and porosity. These fractured sandstones are located on a structurally modified buried hill underlying Paleogene mudstones, and are truncated along an angular unconformity. The fractured sandstone oils of the Triassic Liujiagou, Heshanggou, and Ermaying Formations are derived from the Paleogene Shahejie Formation, which reached peak oil generation and expulsion during the Oligocene to early Miocene (32.8–15.6 Ma). Gas was generated primarily during the Paleogene from Carboniferous and Permian coals. Petrographic evidence suggests that oil and gas emplacement followed the compaction and cementation of the Triassic sandstone reservoirs. Fluid inclusion evidence and burial history analysis suggest that fractures developed before oil emplacement but may have coincided with peak gas generation, which suggests that oil and gas mainly migrated and accumulated in fractures.
The Nomination and Election Committee has selected the candidates to run for the House of Delegates office from a full slate of qualified candidates. The election of these officers by the HoD delegates will take place at the AAPG Annual Convention and Exhibition
We do not dispute that the pores shown in the photomicrograph of figure 8G of Beavington-Penney et al. (2008; reproduced here as Figure 1) could have formed at least partly by poststylolite dissolution, but we do not agree that this photomicrograph constitutes evidence for porosity creation by mesogenetic dissolution in the El Garia Formation of offshore Tunisia. Our skepticism is based on two main considerations: (1) that the multiple possible origins of the pores shown in Figure 1 cannot be determined with any meaningful degree of objective certainty and (2) that Figure 1 appears to be unrepresentative of pore types in the El Garia Formation, based on comparison with numerous other published images from this unit.
The proof is in the colors: A new stratigraphic analysis technique, ChromaStratigraphy, is being used to record changes in color in rock samples and produce a virtual core for viewing.
It’s all about staying on target: Technological advances are helping to make geosteering an increasingly valuable tool for geologists involved in horizontal wells.
Added to the 'first-time-ever” list was the announcing of paper and poster awards at the end of the event.
In an effort to continue serving the geosciences community in the Middle East, AAPG Middle East Region will be offering a number of Geosciences Technology Workshops (GTWs) where the attendees, practitioners and scientists will have an opportunity to discuss real cases, issues and experiences.
A detailed investigation of seismic amplitudes can yield information pertaining to lithological variation in subsurface sedimentary rock formations and the existence and extent of some hydrocarbon zones.
Nuisance? For a long time the Tuscaloosa Marine Shale was considered an irritating target for drillers – but time and economic dynamics have a way of changing perspectives.
“Wait! There is a short cut. Turn right from here”. That’s probably the sound of an electric current bypassing the resistive hydrocarbons, in a maze or network of porous media, when traveling from transmitter to receiver. This workshop will serve the participants need with the up to date advancements in describing and characterizing low resistivity and low contrast pay, and eventually, maximize resources.
President Biden has laid out a bold and ambitious goal of achieving net-zero carbon emissions in the United States by 2050. The pathway to that target includes cutting total greenhouse gas emissions in half by 2030 and eliminating them entirely from the nation’s electricity sector by 2035. The Office of Fossil Energy and Carbon Management will play an important role in the transition to net-zero carbon emissions by reducing the environmental impacts of fossil energy production and use – and helping decarbonize other hard-to abate sectors.
Request a visit from Jennifer Wilcox!
Around 170 million years ago, the Gulf of Mexico basin flooded catastrophically, and the pre-existing landscape, which had been a very rugged, arid, semi-desert world, was drowned beneath an inland sea of salt water. The drowned landscape was then buried under kilometers of salt, perfectly preserving the older topography. Now, with high-quality 3D seismic data, the salt appears as a transparent layer, and the details of the drowned world can be seen in exquisite detail, providing a unique snapshot of the world on the eve of the flooding event. We can map out hills and valleys, and a system of river gullies and a large, meandering river system. These rivers in turn fed into a deep central lake, whose surface was about 750m below global sea level. This new knowledge also reveals how the Louann Salt was deposited. In contrast to published models, the salt was deposited in a deep water, hypersaline sea. We can estimate the rate of deposition, and it was very fast; we believe that the entire thickness of several kilometers of salt was laid down in a few tens of thousands of years, making it possibly the fastest sustained deposition seen so far in the geological record.
Request a visit from Frank Peel!
The Betic hinterland, in the westernmost Mediterranean, constitutes a unique example of a stack of metamorphic units. Using a three-dimensional model for the crustal structure of the Betics-Rif area this talk will address the role of crustal flow simultaneously to upper-crustal low-angle faulting in the origin and evolution of the topography.
Request a visit from Juan I. Soto!
The carbonate sequences that were deposited in the now exhumed Tethyan Ocean influence many aspects of our lives today, either by supplying the energy that warms our homes and the fuel that powers our cars or providing the stunning landscapes for both winter and summer vacations. They also represent some of the most intensely studied rock formations in the world and have provided geoscientists with a fascinating insight into the turbulent nature of 250 Million years of Earth’s history. By combining studies from the full range of geoscience disciplines this presentation will trace the development of these carbonate sequences from their initial formation on the margins of large ancient continental masses to their present day locations in and around the Greater Mediterranean and Near East region. The first order control on growth patterns and carbonate platform development by the regional plate-tectonic setting, underlying basin architecture and fluctuations in sea level will be illustrated. The organisms that contribute to sequence development will be revealed to be treasure troves of forensic information. Finally, these rock sequences will be shown to contain all the ingredients necessary to form and retain hydrocarbons and the manner in which major post-depositional tectonic events led to the formation of some of the largest hydrocarbon accumulations in the world will be demonstrated.
Request a visit from Keith Gerdes!
In comparison with the known boundary conditions that promote salt deformation and flow in sedimentary basins, the processes involved with the mobilization of clay-rich detrital sediments are far less well established. This talk will use seismic examples in different tectonic settings to document the variety of shale geometries that can be formed under brittle and ductile deformations.
As oil and gas exploration and production occur in deeper basins and more complex geologic settings, accurate characterization and modeling of reservoirs to improve estimated ultimate recovery (EUR) prediction, optimize well placement and maximize recovery become paramount. Existing technologies for reservoir characterization and modeling have proven inadequate for delivering detailed 3D predictions of reservoir architecture, connectivity and rock quality at scales that impact subsurface flow patterns and reservoir performance. Because of the gap between the geophysical and geologic data available (seismic, well logs, cores) and the data needed to model rock heterogeneities at the reservoir scale, constraints from external analog systems are needed. Existing stratigraphic concepts and deposition models are mostly empirical and seldom provide quantitative constraints on fine-scale reservoir heterogeneity. Current reservoir modeling tools are challenged to accurately replicate complex, nonstationary, rock heterogeneity patterns that control connectivity, such as shale layers that serve as flow baffles and barriers.
Request a visit from Tao Sun!
Local sea-level changes are not simply a function of global ocean volumes but also the interactions between the solid Earth, the Earth’s gravitational field and the loading and unloading of ice sheets. Contrasting behaviors between Antarctica and Scotland highlight how important the geologic structure beneath the former ice sheets is in determining the interactions between ice sheets and relative sea levels.
Request a visit from Alex Simms!
Three-dimensional (3D) seismic-reflection surveys provide one of the most important data types for understanding subsurface depositional systems. Quantitative analysis is commonly restricted to geophysical interpretation of elastic properties of rocks in the subsurface. Wide availability of 3D seismic-reflection data and integration provide opportunities for quantitative analysis of subsurface stratigraphic sequences. Here, we integrate traditional seismic-stratigraphic interpretation with quantitative geomorphologic analysis and numerical modeling to explore new insights into submarine-channel evolution.
Request a visit from Jacob Covault!
Production from unconventional petroleum reservoirs includes petroleum from shale, coal, tight-sand and oil-sand. These reservoirs contain enormous quantities of oil and natural gas but pose a technology challenge to both geoscientists and engineers to produce economically on a commercial scale. These reservoirs store large volumes and are widely distributed at different stratigraphic levels and basin types, offering long-term potential for energy supply. Most of these reservoirs are low permeability and porosity that need enhancement with hydraulic fracture stimulation to maximize fluid drainage. Production from these reservoirs is increasing with continued advancement in geological characterization techniques and technology for well drilling, logging, and completion with drainage enhancement. Currently, Australia, Argentina, Canada, Egypt, USA, and Venezuela are producing natural gas from low permeability reservoirs: tight-sand, shale, and coal (CBM). Canada, Russia, USA, and Venezuela are producing heavy oil from oilsand. USA is leading the development of techniques for exploring, and technology for exploiting unconventional gas resources, which can help to develop potential gas-bearing shales of Thailand. The main focus is on source-reservoir-seal shale petroleum plays. In these tight rocks petroleum resides in the micro-pores as well as adsorbed on and in the organics. Shale has very low matrix permeability (nano-darcies) and has highly layered formations with differences in vertical and horizontal properties, vertically non-homogeneous and horizontally anisotropic with complicate natural fractures. Understanding the rocks is critical in selecting fluid drainage enhancement mechanisms; rock properties such as where shale is clay or silica rich, clay types and maturation , kerogen type and maturation, permeability, porosity, and saturation. Most of these plays require horizontal development with large numbers of wells that require an understanding of formation structure, setting and reservoir character and its lateral extension. The quality of shale-gas resources depend on thickness of net pay (>100 m), adequate porosity (>2%), high reservoir pressure (ideally overpressure), high thermal maturity (>1.5% Ro), high organic richness (>2% TOC), low in clay (<50%), high in brittle minerals (quartz, carbonates, feldspars), and favourable in-situ stress. During the past decade, unconventional shale and tight-sand gas plays have become an important supply of natural gas in the US, and now in shale oil as well. As a consequence, interest to assess and explore these plays is rapidly spreading worldwide. The high production potential of shale petroleum resources has contributed to a comparably favourable outlook for increased future petroleum supplies globally. Application of 2D and 3D seismic for defining reservoirs and micro seismic for monitoring fracturing, measuring rock properties downhole (borehole imaging) and in laboratory (mineralogy, porosity, permeability), horizontal drilling (downhole GPS), and hydraulic fracture stimulation (cross-linked gel, slick-water, nitrogen or nitrogen foam) is key in improving production from these huge resources with low productivity factors.
Request a visit from Ameed Ghori!
Ticks and clicks 638151804153623493