Oil Prices Steady after Smaller-than-Expected U.S. Crude Build - 26 January, 2023 07:30 AM
Republicans Launch Newest Fight Against Biden's Oil Drawdowns - 26 January, 2023 07:30 AM
Dead Whales, Tough Economics Bedevil Biden's Massive Wind Energy Push - 26 January, 2023 07:30 AM
Why U.S. Oil Cos. May Be Tempted to Purchase European Rivals on the Cheap - 26 January, 2023 07:30 AM
Norway Proposes 92 New Oil and Gas Exploration Blocks - 26 January, 2023 07:30 AM
Low Resistivity Reservoirs: Path to Explore, Discover and Develop Call for Abstracts
Expires in 69 days
The Marcellus Shale is considered to be the largest unconventional shale-gas resource in the United States. Two critical factors for unconventional shale reservoirs are the response of a unit to hydraulic fracture stimulation and gas content. The fracture attributes reflect the geomechanical properties of the rocks, which are partly related to rock mineralogy. The natural gas content of a shale reservoir rock is strongly linked to organic matter content, measured by total organic carbon (TOC). A mudstone lithofacies is a vertically and laterally continuous zone with similar mineral composition, rock geomechanical properties, and TOC content. Core, log, and seismic data were used to build a three-dimensional (3-D) mudrock lithofacies model from core to wells and, finally, to regional scale. An artificial neural network was used for lithofacies prediction. Eight petrophysical parameters derived from conventional logs were determined as critical inputs. Advanced logs, such as pulsed neutron spectroscopy, with log-determined mineral composition and TOC data were used to improve and confirm the quantitative relationship between conventional logs and lithofacies. Sequential indicator simulation performed well for 3-D modeling of Marcellus Shale lithofacies. The interplay of dilution by terrigenous detritus, organic matter productivity, and organic matter preservation and decomposition affected the distribution of Marcellus Shale lithofacies distribution, which may be attributed to water depth and the distance to shoreline. The trend of normalized average gas production rate from horizontal wells supported our approach to modeling Marcellus Shale lithofacies. The proposed 3-D modeling approach may be helpful for optimizing the design of horizontal well trajectories and hydraulic fracture stimulation strategies.
Size fractions (<4 and 0.4–1.0 μ) of Brent Group sandstones from the northern North Sea contain mostly illite-smectite mixed layers with kaolinite, whereas the same size fractions of Fulmar Formation sandstones from the south-central North Sea consist of illite-smectite mixed layers with minor chlorite. Transmission electron microscope observations show elongated illite laths or agglomerates consisting of small laths when larger individual laths are lacking.
The K-Ar data of the fractions less than 0.4 μm of Brent Group samples plot on two arrays in a 40Ar/36Ar vs. 40K/36Ar diagram that have isochron characteristics with ages of 76.5 ± 4.2 and 40.0 ± 1.5 Ma, and initial 40Ar/36Ar ratios of 253 ± 16 and 301 ± 18, respectively. For the Fulmar Formation samples, the data points of the fractions less than 0.2 and less than 0.4 μ also fit two isochrons with ages of 76.6 ± 1.4 and 47.9 ± 0.5 Ma and initial 40Ar/36Ar ratios of 359 ± 52 and 304 ± 2, respectively. Some of the coarser 0.4–1.0-μ fractions also plot on the two isochrons, but most plot above indicating the presence of detrital components more than 0.4 μ. The almost identical ages obtained from illite-type crystals of sandstones with different deposition ages that are located about 600 km (373 mi) apart record two simultaneous illitization episodes. These events were not induced by local burial conditions, but are related to episodic pressure and/or temperature increases in the studied reservoirs, probably induced by hydrocarbon injection. This interpretation is indirectly supported by notably different K-Ar illite ages from cores of a nearby reservoir at hydrostatic pressure.
Illite is not as well crystallized as expected for potential crystallization temperatures above 160°C measured by fluid-inclusion determinations. In both the northern and south-central North Sea, the two illite generations remain unaffected after crystallization despite continued burial, suggesting notably higher crystallization temperatures than those estimated from geothermal gradients. No recent illite crystallization or alteration is recorded in the K-Ar ages, despite a dramatic regional acceleration of the subsidence in the southern North Sea. ±
Pore-volume reduction of sediments by plastic deformation during compaction and by cementation of grains has been evaluated for different proportions of ductile and hard grains. We represent the compaction behavior of grains with a purely geometric model, which uses the cooperative rearrangement algorithm to produce dense, random packings of partly interpenetrating spheres. We varied the fraction of grains assumed to be ductile and the radius of the rigid core of the ductile grains. The predicted relationship between the fraction of ductile grains in the sediment and the porosity after compaction agrees well with previously published experimental data in the literature. The radius of the rigid core of the ductile grains is an effective way to represent different kinds of ductile material, ranging from brittle (rigid radius 0.9) to extremely ductile (rigid radius 0.7). We simulated quartz cementation in our compacted rock by adding isopachous cement. Cement thickness was reduced on the smaller grains and increased on the larger grains to account for presumed export of pressure-dissolved material from finer grained regions and the import of material into coarser grained regions. These simulations yield descriptions of pore-scale geometry resulting from processes common in sandstones. Modeled pore geometry provides insight into transport properties of such rocks. For example, the models predict, to within a factor of five, the permeability of samples of tight-gas sandstones having little intragranular porosity.
Exploration for oil and gas in Saskatchewan was initiated in 1888 with the spudding of a 472-meter (1,548.5 feet) well near the settlement of Belle Plaine some 32 kilometers (20 miles) west of Regina.
Coming to a field near you – new technology that will reshape the oil and gas industry. When? Maybe sooner than you think.
Using diverse geologic and geophysical data from recent exploration and development, and experimental results of analysis of gas content, gas capacity, and gas composition, this article discusses how geologic, structural, and hydrological factors determine the heterogeneous distribution of gas in the Weibei coalbed methane (CBM) field.
The coal rank of the Pennsylvanian no. 5 coal seam is mainly low-volatile bituminous and semianthracite. The total gas content is 2.69 to 16.15 m3/t (95.00–570.33 scf/t), and gas saturation is 26.0% to 93.2%. Burial coalification followed by tectonically driven hydrothermal activity controls not only thermal maturity, but also the quality and quantity of thermogenic gas generated from the coal.
Gas composition indicates that the CBM is dry and of dominantly thermogenic origin. The thermogenic gases have been altered by fractionation that may be related to subsurface water movement in the southern part of the study area.
Three gas accumulation models are identified: (1) gas diffusion and long-distance migration of thermogenic gases to no-flow boundaries for sorption and minor conventional trapping, (2) hydrodynamic trapping of gas in structural lows, and (3) gas loss by hydrodynamic flushing. The first two models are applicable for the formation of two CBM enrichment areas in blocks B3 and B4, whereas the last model explains extremely low gas content and gas saturation in block B5. The variable gas content, saturation, and accumulation characteristics are mainly controlled by these gas accumulation models.
Sequence stratigraphy and coal cycles based on accommodation trends were investigated in the coal-bearing Lower Cretaceous Mannville Group in the Lloydminster heavy oil field, eastern Alberta. The study area is in a low accommodation setting on the cratonic margin of the Western Canada sedimentary basin. Geophysical log correlation of coal seams, shoreface facies, and the identification of incised valleys has produced a sequence-stratigraphic framework for petrographic data from 3 cored and 115 geophysical-logged wells. Maceral analysis, telovitrinite reflectance, and fluorescence measurements were taken from a total of 206 samples. Three terrestrial depositional environments were interpreted from the petrographic data: ombrotrophic mire coal, limnotelmatic mire coal, and carbonaceous shale horizons. Accommodation-based coal (wetting- and drying-upward) cycles represent trends in depositional environment shifts, and these cycles were used to investigate the development and preservation of the coal seams across the study area.
The low-accommodation strata are characterized by a high-frequency occurrence of significant surfaces, coal seam splitting, paleosol, and incised-valley development. Three sequence boundary unconformities are identified in only 20 m (66 ft) of strata. Coal cycle correlations illustrate that each coal seam in this study area was not produced by a single peat-accumulation episode but as an amalgamation of a series of depositional events. Complex relations between the Cummings and Lloydminster coal seams are caused by the lateral fragmentation of strata resulting from the removal of sediment by subaerial erosion or periods of nondeposition. Syndepositional faulting of the underlying basement rock changed local accommodation space and increased the complexity of the coal cycle development.
This study represents a low-accommodation example from a spectrum of stratigraphic studies that have been used to establish a terrestrial sequence-stratigraphic model. The frequency of changes in coal seam quality is an important control on methane distribution within coalbed methane reservoirs and resource calculations in coal mining. A depositional model based on the coal cycle correlations, as shown by this study, can provide coal quality prediction for coalbed methane exploration, reservoir completions, and coal mining.
The fact that velocity models based on seismic reflection surveys commonly do not consider the near-surface geology necessitates filling the gap between the top of a velocity model and the surface of the Earth. In this study, we present a new workflow to build a shallow geologic model based exclusively on borehole data and corroborated by laboratory measurements. The study area is in Chemery (France), located at the southwestern border of the Paris Basin, where a large amount of borehole data is publicly available. The workflow starts with identifying lithologic interfaces in the boreholes and interpolating them between the boreholes. The three-dimensional (3-D) geometry of the lithologies then allows interpretation of the position, orientation, and offset of fault planes. Given the importance of the fault interpretation in the modeling process, a combination of different approaches is used to obtain the most reasonable structural framework. After creating a 3-D grid, the resulting 3-D structural model is populated with upscaled velocity logs from the boreholes, yielding the final near-surface P-wave velocity model. To better constrain the velocity model, we conducted laboratory measurements of P- and S-wave velocities in dry and water-saturated conditions on all lithologies in the model. The laboratory data were used to populate the 3-D near-surface model with VP/VS ratio values. The presented workflow accounts for one-dimensional borehole data and is much more iterative and time-consuming than workflows based on two-dimensional seismic sections. Nevertheless, the workflow results in a robust 3-D near-surface model allowing for structural interpretations and revealing the 3-D seismic velocity field.
Anomalously high porosities and permeabilities are commonly found in the fluvial channel sandstone facies of the Triassic Skagerrak Formation in the central North Sea at burial depths greater than 3200 m (10,499 ft), from which hydrocarbons are currently being produced. The aim of our study was to improve understanding of sandstone diagenesis in the Skagerrak Formation to help predict whether the facies with high porosity may be found at even greater depths. The Skagerrak sandstones comprise fine to medium-grained arkosic to lithic-arkosic arenites. We have used scanning electron microscopy, petrographic analysis, pressure history modeling, and core analysis to assess the timing of growth and origin of mineral cements, with generation, and the impact of high fluid pressure on reservoir quality. Our interpretation is that the anomalously high porosities in the Skagerrak sandstones were maintained by a history of overpressure generation and maintenance from the Late Triassic onward, in combination with early microquartz cementation and subsequent precipitation of robust chlorite grain coats. Increasing salinity of pore fluids during burial diagenesis led to pore-filling halite cements in sustained phreatic conditions. The halite pore-filling cements removed most of the remaining porosity and limited the precipitation of other diagenetic phases. Fluid flow associated with the migration of hydrocarbons during the Neogene is inferred to have dissolved the halite locally. Dissolution of halite cements in the channel sands has given rise to megapores and porosities of as much as 35% at current production depths.
We describe the structure, microstructure, and petrophysical properties of fault rocks from two normal fault zones formed in low-porosity turbiditic arkosic sandstones, in deep diagenesis conditions similar to those of deeply buried reservoirs. These fault rocks are characterized by a foliated fabric and quartz-calcite sealed veins, which formation resulted from the combination of the (1) pressure solution of quartz, (2) intense fracturing sealed by quartz and calcite cements, and (3) neoformation of synkinematic white micas derived from the alteration of feldspars and chlorite. Fluid inclusion microthermometry in quartz and calcite cements demonstrates fault activity at temperatures of 195C to 268C. Permeability measurements on plugs oriented parallel with the principal axes of the finite strain ellipsoid show that the Y axis (parallel with the foliation and veins) is the direction of highest permeability in the foliated sandstone (10–2 md for Y against 10–3 md for X, Z, and the protolith, measured at a confining pressure of 20 bars). Microstructural observations document the localization of the preferential fluid path between the phyllosilicate particles forming the foliation. Hence, the direction of highest permeability in these fault rocks would be parallel with the fault and subhorizontal, that is, perpendicular to the slickenlines representing the local slip direction on the fault surface. We suggest that a similar relationship between kinematic markers and fault rock permeability anisotropy may be found in other fault zone types (reverse or strike-slip) affecting feldspar-rich lithologies in deep diagenesis conditions.
“Wait! There is a short cut. Turn right from here”. That’s probably the sound of an electric current bypassing the resistive hydrocarbons, in a maze or network of porous media, when traveling from transmitter to receiver. This workshop will serve the participants need with the up to date advancements in describing and characterizing low resistivity and low contrast pay, and eventually, maximize resources.
The Betic hinterland, in the westernmost Mediterranean, constitutes a unique example of a stack of metamorphic units. Using a three-dimensional model for the crustal structure of the Betics-Rif area this talk will address the role of crustal flow simultaneously to upper-crustal low-angle faulting in the origin and evolution of the topography.
Request a visit from Juan I. Soto!
Production from unconventional petroleum reservoirs includes petroleum from shale, coal, tight-sand and oil-sand. These reservoirs contain enormous quantities of oil and natural gas but pose a technology challenge to both geoscientists and engineers to produce economically on a commercial scale. These reservoirs store large volumes and are widely distributed at different stratigraphic levels and basin types, offering long-term potential for energy supply. Most of these reservoirs are low permeability and porosity that need enhancement with hydraulic fracture stimulation to maximize fluid drainage. Production from these reservoirs is increasing with continued advancement in geological characterization techniques and technology for well drilling, logging, and completion with drainage enhancement. Currently, Australia, Argentina, Canada, Egypt, USA, and Venezuela are producing natural gas from low permeability reservoirs: tight-sand, shale, and coal (CBM). Canada, Russia, USA, and Venezuela are producing heavy oil from oilsand. USA is leading the development of techniques for exploring, and technology for exploiting unconventional gas resources, which can help to develop potential gas-bearing shales of Thailand.
The main focus is on source-reservoir-seal shale petroleum plays. In these tight rocks petroleum resides in the micro-pores as well as adsorbed on and in the organics. Shale has very low matrix permeability (nano-darcies) and has highly layered formations with differences in vertical and horizontal properties, vertically non-homogeneous and horizontally anisotropic with complicate natural fractures. Understanding the rocks is critical in selecting fluid drainage enhancement mechanisms; rock properties such as where shale is clay or silica rich, clay types and maturation , kerogen type and maturation, permeability, porosity, and saturation. Most of these plays require horizontal development with large numbers of wells that require an understanding of formation structure, setting and reservoir character and its lateral extension.
The quality of shale-gas resources depend on thickness of net pay (>100 m), adequate porosity (>2%), high reservoir pressure (ideally overpressure), high thermal maturity (>1.5% Ro), high organic richness (>2% TOC), low in clay (<50%), high in brittle minerals (quartz, carbonates, feldspars), and favourable in-situ stress.
During the past decade, unconventional shale and tight-sand gas plays have become an important supply of natural gas in the US, and now in shale oil as well. As a consequence, interest to assess and explore these plays is rapidly spreading worldwide. The high production potential of shale petroleum resources has contributed to a comparably favourable outlook for increased future petroleum supplies globally.
Application of 2D and 3D seismic for defining reservoirs and micro seismic for monitoring fracturing, measuring rock properties downhole (borehole imaging) and in laboratory (mineralogy, porosity, permeability), horizontal drilling (downhole GPS), and hydraulic fracture stimulation (cross-linked gel, slick-water, nitrogen or nitrogen foam) is key in improving production from these huge resources with low productivity factors.
Request a visit from Ameed Ghori!
As oil and gas exploration and production occur in deeper basins and more complex geologic settings, accurate characterization and modeling of reservoirs to improve estimated ultimate recovery (EUR) prediction, optimize well placement and maximize recovery become paramount. Existing technologies for reservoir characterization and modeling have proven inadequate for delivering detailed 3D predictions of reservoir architecture, connectivity and rock quality at scales that impact subsurface flow patterns and reservoir performance. Because of the gap between the geophysical and geologic data available (seismic, well logs, cores) and the data needed to model rock heterogeneities at the reservoir scale, constraints from external analog systems are needed. Existing stratigraphic concepts and deposition models are mostly empirical and seldom provide quantitative constraints on fine-scale reservoir heterogeneity. Current reservoir modeling tools are challenged to accurately replicate complex, nonstationary, rock heterogeneity patterns that control connectivity, such as shale layers that serve as flow baffles and barriers.
Request a visit from Tao Sun!
In comparison with the known boundary conditions that promote salt deformation and flow in sedimentary basins, the processes involved with the mobilization of clay-rich detrital sediments are far less well established. This talk will use seismic examples in different tectonic settings to document the variety of shale geometries that can be formed under brittle and ductile deformations.
President Biden has laid out a bold and ambitious goal of achieving net-zero carbon emissions in the United States by 2050. The pathway to that target includes cutting total greenhouse gas emissions in half by 2030 and eliminating them entirely from the nation’s electricity sector by 2035.
The Office of Fossil Energy and Carbon Management will play an important role in the transition to net-zero carbon emissions by reducing the environmental impacts of fossil energy production and use – and helping decarbonize other hard-to abate sectors.
Request a visit from Jennifer Wilcox!
Three-dimensional (3D) seismic-reflection surveys provide one of the most important data types for understanding subsurface depositional systems. Quantitative analysis is commonly restricted to geophysical interpretation of elastic properties of rocks in the subsurface.
Wide availability of 3D seismic-reflection data and integration provide opportunities for quantitative analysis of subsurface stratigraphic sequences. Here, we integrate traditional seismic-stratigraphic interpretation with quantitative geomorphologic analysis and numerical modeling to explore new insights into submarine-channel evolution.
Request a visit from Jacob Covault!
Local sea-level changes are not simply a function of global ocean volumes but also the interactions between the solid Earth, the Earth’s gravitational field and the loading and unloading of ice sheets. Contrasting behaviors between Antarctica and Scotland highlight how important the geologic structure beneath the former ice sheets is in determining the interactions between ice sheets and relative sea levels.
Request a visit from Alex Simms!
The carbonate sequences that were deposited in the now exhumed Tethyan Ocean influence many aspects of our lives today, either by supplying the energy that warms our homes and the fuel that powers our cars or providing the stunning landscapes for both winter and summer vacations. They also represent some of the most intensely studied rock formations in the world and have provided geoscientists with a fascinating insight into the turbulent nature of 250 Million years of Earth’s history.
By combining studies from the full range of geoscience disciplines this presentation will trace the development of these carbonate sequences from their initial formation on the margins of large ancient continental masses to their present day locations in and around the Greater Mediterranean and Near East region.
The first order control on growth patterns and carbonate platform development by the regional plate-tectonic setting, underlying basin architecture and fluctuations in sea level will be illustrated. The organisms that contribute to sequence development will be revealed to be treasure troves of forensic information. Finally, these rock sequences will be shown to contain all the ingredients necessary to form and retain hydrocarbons and the manner in which major post-depositional tectonic events led to the formation of some of the largest hydrocarbon accumulations in the world will be demonstrated.
Request a visit from Keith Gerdes!
Around 170 million years ago, the Gulf of Mexico basin flooded catastrophically, and the pre-existing landscape, which had been a very rugged, arid, semi-desert world, was drowned beneath an inland sea of salt water. The drowned landscape was then buried under kilometers of salt, perfectly preserving the older topography. Now, with high-quality 3D seismic data, the salt appears as a transparent layer, and the details of the drowned world can be seen in exquisite detail, providing a unique snapshot of the world on the eve of the flooding event. We can map out hills and valleys, and a system of river gullies and a large, meandering river system. These rivers in turn fed into a deep central lake, whose surface was about 750m below global sea level. This new knowledge also reveals how the Louann Salt was deposited. In contrast to published models, the salt was deposited in a deep water, hypersaline sea. We can estimate the rate of deposition, and it was very fast; we believe that the entire thickness of several kilometers of salt was laid down in a few tens of thousands of years, making it possibly the fastest sustained deposition seen so far in the geological record.
Request a visit from Frank Peel!
Ticks and clicks 638104055226562500
How to Join
100 Years Anniversary
About AAPG Divisions
DEG: Division of Environmental Geosciences
DPA: Division of Professional Affairs
EMD: Energy Minerals Division
PSGD: Petroleum Structure and Geomechanics Division
Geosciences Technology Workshops (GTW)
In Person Training
Visiting Geoscientist Program
Asia Pacific Region
Latin America Region
Middle East Region
Imperial Barrel Award
Africa (Lagos) Office
Asia Pacific (Singapore) Office
Europe (London) Office
Latin America (Bogotá) Office
Middle East (Dubai) Office
Purpose / Mission
Constitution & Bylaws
Access Online Journals
Review Site Activity
Upgrade Member Level
Annual Convention and Exhibition
International Conference and Exhibition
Unconventional Resources Technology Conference
Arctic Technology Conference
Imperial Barrel Award
Books - Buy one
Imperial Barrel Award
Renew Sponsored Dues
Search and Discovery
Visiting Geoscientist Program
LinkedIn | Facebook | Twitter | YouTube
Email: | Other Contact Info