Oil Prices Steady after Smaller-than-Expected U.S. Crude Build - 26 January, 2023 07:30 AM
Republicans Launch Newest Fight Against Biden's Oil Drawdowns - 26 January, 2023 07:30 AM
Dead Whales, Tough Economics Bedevil Biden's Massive Wind Energy Push - 26 January, 2023 07:30 AM
Why U.S. Oil Cos. May Be Tempted to Purchase European Rivals on the Cheap - 26 January, 2023 07:30 AM
Norway Proposes 92 New Oil and Gas Exploration Blocks - 26 January, 2023 07:30 AM
Low Resistivity Reservoirs: Path to Explore, Discover and Develop Call for Abstracts
Expires in 69 days
Can super basins save the planet? IHS Markit, the international industry analysis firm, estimates the world will need to replace production of more than 14.5 billion barrels of oil equivalent annually by the year 2040.
Understanding the business side of oil and gas exploration and development is fundamental to success, especially in times of uncertainty and disruptive technologies. Welcome to an interview with Joe Dumesnil, Overland Oil and Gas. Joe will be speaking at the AAPG Annual Convention in the Special Session on the Business of Oil and Gas.
The second edition of the AAPG Stratigraphic Traps of the Middle East workshop took place on 11 – 13 December 2017 at the Shangri-La Barr Al Jissah hotel, Muscat, Oman. This year we had seventy two attendees from ten different countries.
The Field Seminar: Strike-Slip Tectonics, Tectono-Stratigraphy And Petroleum Systems Of The Levant Restraining Bend In Lebanon will take place in Beirut, Lebanon from 26-28 April 2018.
Australia’s first offshore well heralded a new era of hydrocarbon independence for a continent previously thought to have “the wrong geology” to host significant oil and gas deposits. This success did not come easily – the early history of oil exploration in eastern Australia was long and frustrating, and not very successful.
The definition of accurate horizons is critical to the construction of the low-frequency component of the impedance model used in seismic impedance inversion.
Our industry, science and profession have been taking note of the importance of being prominent and proactive in assuring the public and other stakeholders that the energy extraction industry implements environmental stewardship in a manner equivalent to its skill and innovation in extracting the oil, gas and minerals that society needs.
The Energy and Environmental Science & Technology Directorate at the Idaho National Laboratory has scientists working diligently to better understand how fluids might flow through the small pores in shales where the silt- and clay-size particles can measure as small as less than 0.004 millimeters.
Big Oil’s next big gusher will happen at a tiny, tiny scale, according to scientists at IBM.
The industry might be tempted to relax or postpone environmental compliance activities, especially those that might be new or expensive. Succumbing to this temptation is risky and could prove more costly in the long run.
“Wait! There is a short cut. Turn right from here”. That’s probably the sound of an electric current bypassing the resistive hydrocarbons, in a maze or network of porous media, when traveling from transmitter to receiver. This workshop will serve the participants need with the up to date advancements in describing and characterizing low resistivity and low contrast pay, and eventually, maximize resources.
In comparison with the known boundary conditions that promote salt deformation and flow in sedimentary basins, the processes involved with the mobilization of clay-rich detrital sediments are far less well established. This talk will use seismic examples in different tectonic settings to document the variety of shale geometries that can be formed under brittle and ductile deformations.
Request a visit from Juan I. Soto!
As oil and gas exploration and production occur in deeper basins and more complex geologic settings, accurate characterization and modeling of reservoirs to improve estimated ultimate recovery (EUR) prediction, optimize well placement and maximize recovery become paramount. Existing technologies for reservoir characterization and modeling have proven inadequate for delivering detailed 3D predictions of reservoir architecture, connectivity and rock quality at scales that impact subsurface flow patterns and reservoir performance. Because of the gap between the geophysical and geologic data available (seismic, well logs, cores) and the data needed to model rock heterogeneities at the reservoir scale, constraints from external analog systems are needed. Existing stratigraphic concepts and deposition models are mostly empirical and seldom provide quantitative constraints on fine-scale reservoir heterogeneity. Current reservoir modeling tools are challenged to accurately replicate complex, nonstationary, rock heterogeneity patterns that control connectivity, such as shale layers that serve as flow baffles and barriers.
Request a visit from Tao Sun!
Around 170 million years ago, the Gulf of Mexico basin flooded catastrophically, and the pre-existing landscape, which had been a very rugged, arid, semi-desert world, was drowned beneath an inland sea of salt water. The drowned landscape was then buried under kilometers of salt, perfectly preserving the older topography. Now, with high-quality 3D seismic data, the salt appears as a transparent layer, and the details of the drowned world can be seen in exquisite detail, providing a unique snapshot of the world on the eve of the flooding event. We can map out hills and valleys, and a system of river gullies and a large, meandering river system. These rivers in turn fed into a deep central lake, whose surface was about 750m below global sea level. This new knowledge also reveals how the Louann Salt was deposited. In contrast to published models, the salt was deposited in a deep water, hypersaline sea. We can estimate the rate of deposition, and it was very fast; we believe that the entire thickness of several kilometers of salt was laid down in a few tens of thousands of years, making it possibly the fastest sustained deposition seen so far in the geological record.
Request a visit from Frank Peel!
Production from unconventional petroleum reservoirs includes petroleum from shale, coal, tight-sand and oil-sand. These reservoirs contain enormous quantities of oil and natural gas but pose a technology challenge to both geoscientists and engineers to produce economically on a commercial scale. These reservoirs store large volumes and are widely distributed at different stratigraphic levels and basin types, offering long-term potential for energy supply. Most of these reservoirs are low permeability and porosity that need enhancement with hydraulic fracture stimulation to maximize fluid drainage. Production from these reservoirs is increasing with continued advancement in geological characterization techniques and technology for well drilling, logging, and completion with drainage enhancement. Currently, Australia, Argentina, Canada, Egypt, USA, and Venezuela are producing natural gas from low permeability reservoirs: tight-sand, shale, and coal (CBM). Canada, Russia, USA, and Venezuela are producing heavy oil from oilsand. USA is leading the development of techniques for exploring, and technology for exploiting unconventional gas resources, which can help to develop potential gas-bearing shales of Thailand.
The main focus is on source-reservoir-seal shale petroleum plays. In these tight rocks petroleum resides in the micro-pores as well as adsorbed on and in the organics. Shale has very low matrix permeability (nano-darcies) and has highly layered formations with differences in vertical and horizontal properties, vertically non-homogeneous and horizontally anisotropic with complicate natural fractures. Understanding the rocks is critical in selecting fluid drainage enhancement mechanisms; rock properties such as where shale is clay or silica rich, clay types and maturation , kerogen type and maturation, permeability, porosity, and saturation. Most of these plays require horizontal development with large numbers of wells that require an understanding of formation structure, setting and reservoir character and its lateral extension.
The quality of shale-gas resources depend on thickness of net pay (>100 m), adequate porosity (>2%), high reservoir pressure (ideally overpressure), high thermal maturity (>1.5% Ro), high organic richness (>2% TOC), low in clay (<50%), high in brittle minerals (quartz, carbonates, feldspars), and favourable in-situ stress.
During the past decade, unconventional shale and tight-sand gas plays have become an important supply of natural gas in the US, and now in shale oil as well. As a consequence, interest to assess and explore these plays is rapidly spreading worldwide. The high production potential of shale petroleum resources has contributed to a comparably favourable outlook for increased future petroleum supplies globally.
Application of 2D and 3D seismic for defining reservoirs and micro seismic for monitoring fracturing, measuring rock properties downhole (borehole imaging) and in laboratory (mineralogy, porosity, permeability), horizontal drilling (downhole GPS), and hydraulic fracture stimulation (cross-linked gel, slick-water, nitrogen or nitrogen foam) is key in improving production from these huge resources with low productivity factors.
Request a visit from Ameed Ghori!
The carbonate sequences that were deposited in the now exhumed Tethyan Ocean influence many aspects of our lives today, either by supplying the energy that warms our homes and the fuel that powers our cars or providing the stunning landscapes for both winter and summer vacations. They also represent some of the most intensely studied rock formations in the world and have provided geoscientists with a fascinating insight into the turbulent nature of 250 Million years of Earth’s history.
By combining studies from the full range of geoscience disciplines this presentation will trace the development of these carbonate sequences from their initial formation on the margins of large ancient continental masses to their present day locations in and around the Greater Mediterranean and Near East region.
The first order control on growth patterns and carbonate platform development by the regional plate-tectonic setting, underlying basin architecture and fluctuations in sea level will be illustrated. The organisms that contribute to sequence development will be revealed to be treasure troves of forensic information. Finally, these rock sequences will be shown to contain all the ingredients necessary to form and retain hydrocarbons and the manner in which major post-depositional tectonic events led to the formation of some of the largest hydrocarbon accumulations in the world will be demonstrated.
Request a visit from Keith Gerdes!
President Biden has laid out a bold and ambitious goal of achieving net-zero carbon emissions in the United States by 2050. The pathway to that target includes cutting total greenhouse gas emissions in half by 2030 and eliminating them entirely from the nation’s electricity sector by 2035.
The Office of Fossil Energy and Carbon Management will play an important role in the transition to net-zero carbon emissions by reducing the environmental impacts of fossil energy production and use – and helping decarbonize other hard-to abate sectors.
Request a visit from Jennifer Wilcox!
Three-dimensional (3D) seismic-reflection surveys provide one of the most important data types for understanding subsurface depositional systems. Quantitative analysis is commonly restricted to geophysical interpretation of elastic properties of rocks in the subsurface.
Wide availability of 3D seismic-reflection data and integration provide opportunities for quantitative analysis of subsurface stratigraphic sequences. Here, we integrate traditional seismic-stratigraphic interpretation with quantitative geomorphologic analysis and numerical modeling to explore new insights into submarine-channel evolution.
Request a visit from Jacob Covault!
Local sea-level changes are not simply a function of global ocean volumes but also the interactions between the solid Earth, the Earth’s gravitational field and the loading and unloading of ice sheets. Contrasting behaviors between Antarctica and Scotland highlight how important the geologic structure beneath the former ice sheets is in determining the interactions between ice sheets and relative sea levels.
Request a visit from Alex Simms!
The Betic hinterland, in the westernmost Mediterranean, constitutes a unique example of a stack of metamorphic units. Using a three-dimensional model for the crustal structure of the Betics-Rif area this talk will address the role of crustal flow simultaneously to upper-crustal low-angle faulting in the origin and evolution of the topography.
Ticks and clicks 638103969916804403
How to Join
100 Years Anniversary
About AAPG Divisions
DEG: Division of Environmental Geosciences
DPA: Division of Professional Affairs
EMD: Energy Minerals Division
PSGD: Petroleum Structure and Geomechanics Division
Geosciences Technology Workshops (GTW)
In Person Training
Visiting Geoscientist Program
Asia Pacific Region
Latin America Region
Middle East Region
Imperial Barrel Award
Africa (Lagos) Office
Asia Pacific (Singapore) Office
Europe (London) Office
Latin America (Bogotá) Office
Middle East (Dubai) Office
Purpose / Mission
Constitution & Bylaws
Access Online Journals
Review Site Activity
Upgrade Member Level
Annual Convention and Exhibition
International Conference and Exhibition
Unconventional Resources Technology Conference
Arctic Technology Conference
Imperial Barrel Award
Books - Buy one
Imperial Barrel Award
Renew Sponsored Dues
Search and Discovery
Visiting Geoscientist Program
LinkedIn | Facebook | Twitter | YouTube
Email: | Other Contact Info