Oil Prices Steady after Smaller-than-Expected U.S. Crude Build - 26 January, 2023 07:30 AM
Republicans Launch Newest Fight Against Biden's Oil Drawdowns - 26 January, 2023 07:30 AM
Dead Whales, Tough Economics Bedevil Biden's Massive Wind Energy Push - 26 January, 2023 07:30 AM
Why U.S. Oil Cos. May Be Tempted to Purchase European Rivals on the Cheap - 26 January, 2023 07:30 AM
Norway Proposes 92 New Oil and Gas Exploration Blocks - 26 January, 2023 07:30 AM
Low Resistivity Reservoirs: Path to Explore, Discover and Develop Call for Abstracts
Expires in 68 days
Online registration is now open for the AAPG Annual Convention and Exhibition, which will be held May 31-June 3 in Denver at the Colorado Convention Center. And those who register by April 6 can save up to $210 on their registration fees. Student fees and one-day pass payments also are available.
Equipping you to be a world-class geoscientist is our goal here at AAPG. It’s why we exist as a scientific and professional association: To assist you throughout your career to stay at the top of your game.
The call for abstracts deadline is Jan. 15 for the next AAPG International Conference and Exhibition – a meeting that will be historic on many levels. This year’s ICE will be held Sept. 13-16 in Melbourne, Australia – the first time AAPG has used that city as a setting for ICE.
According to Juan Carlos Soldo, who just recently led the successful IX Hydrocarbon Exploration and Development Congress in Mendoza, Argentina, “Unconventionals really aren't so unconventional anymore.”
The call for abstracts is open for the next AAPG International Conference and Exhibition – a meeting that will be historic on many levels. The 2015 ICE will be held Sept. 13-16 in the beautiful city of Melbourne, Australia– the first time ever AAPG has used that city as a setting for ICE. The meeting will be hosted by the Petroleum Exploration Society of Australia.
The idea of using lasers for drilling into the earth has long been to the oil and gas industry what flying cars and hoverboards are to the general public – the stuff of science fiction and futuristic fantasy. As 2015 fast approaches (contrary to what we were promised in the “Back to the Future” movies) we haven’t quite cracked the code yet on flying cars and hoverboards, but there might be a consolation prize in the works: Laser drilling may actually become a reality.
What’s new in downhole geology, you ask? According to the advertising and press releases that are sent throughout the media, there’s a lot that’s new – more, in fact, than we could ever cover. But since this is our annual Downhole Geology issue, we thought we’d take a look at some of the latest advancements in drilling, well-logging and other downhole innovations rolled out in recent months by a few industry heavy-hitters.
Pumps & Pipes brings together the newest technologies from the oil and gas, medical and aerospace professions in Houston to talk about something they all have in common: Problems. More specifically, members talk about problems because someone else in the room – from a completely different discipline and expertise – may already have found an effective solution.
Like numerous other geologic formations, the allure of the Wilcox has waxed and waned owing to fluctuating commodity prices, among other issues. As hydrocarbon prices recovered and technology applications like hydraulic fracturing became commonplace, the Wilcox beckoned anew, attracting principally the mom-and-pop shops and the small to mid-size independents.
In the age of 3-D seismic and digitized well logs, the value of cores and other rock samples may not be obvious. But benefits like those noted by the AAPG in 1948 and described in a 2002 National Research Council report and a recent congressional hearing continue to demonstrate the value of properly archived subsurface samples and data.
“Wait! There is a short cut. Turn right from here”. That’s probably the sound of an electric current bypassing the resistive hydrocarbons, in a maze or network of porous media, when traveling from transmitter to receiver. This workshop will serve the participants need with the up to date advancements in describing and characterizing low resistivity and low contrast pay, and eventually, maximize resources.
Salt welds form due to salt thinning by mechanical (e.g., salt-flow) and/or chemical (e.g., salt-dissolution) processes.
This webinar explores how we use 3-D seismic reflection, borehole, and biostratigraphic data to constrain the thickness and composition of salt welds, and to test the predictions of analytical models for salt welding.
This work investigates how heterogeneity can be defined and how we can quantify this term by describing a range of statistical heterogeneity (e.g. coefficient of variation and the Lorenz coefficient).
The purpose of this talk is to provide a forum to discuss the applications of geological modeling in various domains of practice. The presentation is geared towards a general geoscience audience of undergraduates, graduate students, university academicians, and geoscience practitioners at all career levels.
This e-symposium presents techniques for predicting pore pressure in seals by examining case studies from the Gulf of Mexico and incorporating the relationship between rocks, fluids, stress, and pressure.
Thulisile Sopete explores the sedimentary evolution of the Pletmos Basin. The Pletmos Basin is a sub-basin of the greater Outeniqua Basin, is located off the south coast of South Africa and is bounded by the Bredasdorp Basin to the west, the Gamtoos Basin to the east and the Southern Outeniqua Basin to the south.
The approach applied in the analysis for this study was based on five selected seismic transects which were interpreted using seismic stratigraphy. These interpretations were incorporated along with composite logs analysis for their respective wells to provide the framework in understanding how the Pletmos Basin evolved sedimentologically.
This e-symposium introduces you to the practical benefits of thermal profiling for a variety of unconventional oil and gas projects, including tight gas sands, oil shale, low-gravity oil.
This e-symposium presentation places the interpretation of deep-water turbidites discernible in 3-D seismic inversion data within a geological context.
Recent interest in unconventional gas resources has attracted several oil and gas explorers to sedimentary basins in Southern Quebec.
This presentation will review the results of ongoing carbon storage research in Kentucky by the Kentucky Geological Survey (KGS) and industry partners.
The geochemistry of formation fluids (water and hydrocarbon gases) in the Uinta Basin, Utah, is evaluated at the regional scale based on fluid sampling and compilation of past records.
As oil and gas exploration and production occur in deeper basins and more complex geologic settings, accurate characterization and modeling of reservoirs to improve estimated ultimate recovery (EUR) prediction, optimize well placement and maximize recovery become paramount. Existing technologies for reservoir characterization and modeling have proven inadequate for delivering detailed 3D predictions of reservoir architecture, connectivity and rock quality at scales that impact subsurface flow patterns and reservoir performance. Because of the gap between the geophysical and geologic data available (seismic, well logs, cores) and the data needed to model rock heterogeneities at the reservoir scale, constraints from external analog systems are needed. Existing stratigraphic concepts and deposition models are mostly empirical and seldom provide quantitative constraints on fine-scale reservoir heterogeneity. Current reservoir modeling tools are challenged to accurately replicate complex, nonstationary, rock heterogeneity patterns that control connectivity, such as shale layers that serve as flow baffles and barriers.
Request a visit from Tao Sun!
The Betic hinterland, in the westernmost Mediterranean, constitutes a unique example of a stack of metamorphic units. Using a three-dimensional model for the crustal structure of the Betics-Rif area this talk will address the role of crustal flow simultaneously to upper-crustal low-angle faulting in the origin and evolution of the topography.
Request a visit from Juan I. Soto!
In comparison with the known boundary conditions that promote salt deformation and flow in sedimentary basins, the processes involved with the mobilization of clay-rich detrital sediments are far less well established. This talk will use seismic examples in different tectonic settings to document the variety of shale geometries that can be formed under brittle and ductile deformations.
Around 170 million years ago, the Gulf of Mexico basin flooded catastrophically, and the pre-existing landscape, which had been a very rugged, arid, semi-desert world, was drowned beneath an inland sea of salt water. The drowned landscape was then buried under kilometers of salt, perfectly preserving the older topography. Now, with high-quality 3D seismic data, the salt appears as a transparent layer, and the details of the drowned world can be seen in exquisite detail, providing a unique snapshot of the world on the eve of the flooding event. We can map out hills and valleys, and a system of river gullies and a large, meandering river system. These rivers in turn fed into a deep central lake, whose surface was about 750m below global sea level. This new knowledge also reveals how the Louann Salt was deposited. In contrast to published models, the salt was deposited in a deep water, hypersaline sea. We can estimate the rate of deposition, and it was very fast; we believe that the entire thickness of several kilometers of salt was laid down in a few tens of thousands of years, making it possibly the fastest sustained deposition seen so far in the geological record.
Request a visit from Frank Peel!
Three-dimensional (3D) seismic-reflection surveys provide one of the most important data types for understanding subsurface depositional systems. Quantitative analysis is commonly restricted to geophysical interpretation of elastic properties of rocks in the subsurface.
Wide availability of 3D seismic-reflection data and integration provide opportunities for quantitative analysis of subsurface stratigraphic sequences. Here, we integrate traditional seismic-stratigraphic interpretation with quantitative geomorphologic analysis and numerical modeling to explore new insights into submarine-channel evolution.
Request a visit from Jacob Covault!
Production from unconventional petroleum reservoirs includes petroleum from shale, coal, tight-sand and oil-sand. These reservoirs contain enormous quantities of oil and natural gas but pose a technology challenge to both geoscientists and engineers to produce economically on a commercial scale. These reservoirs store large volumes and are widely distributed at different stratigraphic levels and basin types, offering long-term potential for energy supply. Most of these reservoirs are low permeability and porosity that need enhancement with hydraulic fracture stimulation to maximize fluid drainage. Production from these reservoirs is increasing with continued advancement in geological characterization techniques and technology for well drilling, logging, and completion with drainage enhancement. Currently, Australia, Argentina, Canada, Egypt, USA, and Venezuela are producing natural gas from low permeability reservoirs: tight-sand, shale, and coal (CBM). Canada, Russia, USA, and Venezuela are producing heavy oil from oilsand. USA is leading the development of techniques for exploring, and technology for exploiting unconventional gas resources, which can help to develop potential gas-bearing shales of Thailand.
The main focus is on source-reservoir-seal shale petroleum plays. In these tight rocks petroleum resides in the micro-pores as well as adsorbed on and in the organics. Shale has very low matrix permeability (nano-darcies) and has highly layered formations with differences in vertical and horizontal properties, vertically non-homogeneous and horizontally anisotropic with complicate natural fractures. Understanding the rocks is critical in selecting fluid drainage enhancement mechanisms; rock properties such as where shale is clay or silica rich, clay types and maturation , kerogen type and maturation, permeability, porosity, and saturation. Most of these plays require horizontal development with large numbers of wells that require an understanding of formation structure, setting and reservoir character and its lateral extension.
The quality of shale-gas resources depend on thickness of net pay (>100 m), adequate porosity (>2%), high reservoir pressure (ideally overpressure), high thermal maturity (>1.5% Ro), high organic richness (>2% TOC), low in clay (<50%), high in brittle minerals (quartz, carbonates, feldspars), and favourable in-situ stress.
During the past decade, unconventional shale and tight-sand gas plays have become an important supply of natural gas in the US, and now in shale oil as well. As a consequence, interest to assess and explore these plays is rapidly spreading worldwide. The high production potential of shale petroleum resources has contributed to a comparably favourable outlook for increased future petroleum supplies globally.
Application of 2D and 3D seismic for defining reservoirs and micro seismic for monitoring fracturing, measuring rock properties downhole (borehole imaging) and in laboratory (mineralogy, porosity, permeability), horizontal drilling (downhole GPS), and hydraulic fracture stimulation (cross-linked gel, slick-water, nitrogen or nitrogen foam) is key in improving production from these huge resources with low productivity factors.
Request a visit from Ameed Ghori!
President Biden has laid out a bold and ambitious goal of achieving net-zero carbon emissions in the United States by 2050. The pathway to that target includes cutting total greenhouse gas emissions in half by 2030 and eliminating them entirely from the nation’s electricity sector by 2035.
The Office of Fossil Energy and Carbon Management will play an important role in the transition to net-zero carbon emissions by reducing the environmental impacts of fossil energy production and use – and helping decarbonize other hard-to abate sectors.
Request a visit from Jennifer Wilcox!
The carbonate sequences that were deposited in the now exhumed Tethyan Ocean influence many aspects of our lives today, either by supplying the energy that warms our homes and the fuel that powers our cars or providing the stunning landscapes for both winter and summer vacations. They also represent some of the most intensely studied rock formations in the world and have provided geoscientists with a fascinating insight into the turbulent nature of 250 Million years of Earth’s history.
By combining studies from the full range of geoscience disciplines this presentation will trace the development of these carbonate sequences from their initial formation on the margins of large ancient continental masses to their present day locations in and around the Greater Mediterranean and Near East region.
The first order control on growth patterns and carbonate platform development by the regional plate-tectonic setting, underlying basin architecture and fluctuations in sea level will be illustrated. The organisms that contribute to sequence development will be revealed to be treasure troves of forensic information. Finally, these rock sequences will be shown to contain all the ingredients necessary to form and retain hydrocarbons and the manner in which major post-depositional tectonic events led to the formation of some of the largest hydrocarbon accumulations in the world will be demonstrated.
Request a visit from Keith Gerdes!
Local sea-level changes are not simply a function of global ocean volumes but also the interactions between the solid Earth, the Earth’s gravitational field and the loading and unloading of ice sheets. Contrasting behaviors between Antarctica and Scotland highlight how important the geologic structure beneath the former ice sheets is in determining the interactions between ice sheets and relative sea levels.
Request a visit from Alex Simms!
Ticks and clicks 638104955178802430
How to Join
100 Years Anniversary
About AAPG Divisions
DEG: Division of Environmental Geosciences
DPA: Division of Professional Affairs
EMD: Energy Minerals Division
PSGD: Petroleum Structure and Geomechanics Division
Geosciences Technology Workshops (GTW)
In Person Training
Visiting Geoscientist Program
Asia Pacific Region
Latin America Region
Middle East Region
Imperial Barrel Award
Africa (Lagos) Office
Asia Pacific (Singapore) Office
Europe (London) Office
Latin America (Bogotá) Office
Middle East (Dubai) Office
Purpose / Mission
Constitution & Bylaws
Access Online Journals
Review Site Activity
Upgrade Member Level
Annual Convention and Exhibition
International Conference and Exhibition
Unconventional Resources Technology Conference
Arctic Technology Conference
Imperial Barrel Award
Books - Buy one
Imperial Barrel Award
Renew Sponsored Dues
Search and Discovery
Visiting Geoscientist Program
LinkedIn | Facebook | Twitter | YouTube
Email: | Other Contact Info