Publications

Bulletin Article

Fault displacement-distance relationships as indicators of contractional fault-related folding style

We present a method of using fault displacement-distance profiles to distinguish fault-bend, shear fault-bend, and fault-propagation folds, and use these insights to guide balanced and retrodeformable interpretations of these structures. We first describe the displacement profiles associated with different end-member fault-related folding models, then provide examples of structures that are consistent with these model-based predictions. Natural examples are imaged in high-resolution two- and three dimensional seismic reflection data sets from the Niger Delta, Sichuan Basin, Sierras Pampeanas, and Cascadia to record variations in displacement with distance updip along faults (termed displacement-distance profiles). Fault-bend folds exhibit constant displacement along fault segments and changes in displacement associated with bends in faults, shear fault-bend folds demonstrate an increase in displacement through the shearing interval, and fault-propagation folds exhibit decreasing displacement toward the fault tip. More complex structures are then investigated using this method, demonstrating that displacement-distance profiles can be used to provide insight into structures that involve multiple fault-related folding processes or have changed kinematic behavior over time. These interpretations are supported by comparison with the kinematics inferred from the geometry of growth strata overlying these structures. Collectively, these analyses illustrate that the displacement-distance approach can provide valuable insights into the styles of fault-related folding.

Added on 31 January, 2014

Bulletin Article

Prediction of channel connectivity and fluvial style in the flood-basin successions of the Upper Permian Rangal coal measures (Queensland)

Predicting the presence and connectivity of reservoir-quality facies in otherwise mud-prone fluvial overbank successions is important because such sand bodies can potentially provide connectivity between larger neighboring sand bodies. This article addresses minor channelized fluvial elements (crevasse-splay and distributary channels) and attempts to predict the connectivity between such sand bodies in two interseam packages of the Upper Permian Rangal Coal Measures of northeastern Australia. Channel-body percent as measured in well logs was 2% in the upper (Aries-Castor) interseam and 17% in the lower (Castor-Pollux) interseam. Well spacing were too great to allow accurate correlation of channel bodies. The Ob River, Siberia, was used as a modern analog to supply planform geometric measurements of splay and distributary channels so that stochastic modeling of channel bodies was possible. The resulting models demonstrated that (1) channel-body connectivity is more uniform between minor distributary channels than between crevasse-splay channels; (2) relatively good connectivity is seen in proximal positions in splays but decreases distally from the source as channel elements diverge; and (3) connectivity tends to be greater down the axis of splays, with more isolated channel bodies occurring at the margins.

Added on 31 January, 2014

Explorer Article By David Brown

Discoveries Made It a Year to Remember

Discoveries were comparatively sparse, but they persisted steadily throughout the year. Here are some of the more significant discoveries of the past year.

Added on 01 January, 2014

Explorer Article By David Brown

No Elephants, But Plenty of Potential for 2014

A review of major oil and gas discoveries of 2013 shows a down year in terms of quantity—but that’s not the whole story.

Added on 01 January, 2014

Bulletin Article

Salt structures and hydrocarbon accumulations in the Tarim Basin, northwest China

The Tarim Basin is one of the most important hydrocabon-bearing evaporite basins in China. Four salt-bearing sequences, the Middle and Lower Cambrian, the Mississippian, the Paleogene, and the Neogene, have various thickness and areal distribution. They are important detachment layers and intensely affect the structural deformation in the basin. The Kuqa depression is a subordinate structural unit with abundant salt structures in the Tarim Basin. Salt overthrusts, salt pillows, salt anticlines, salt diapirs, and salt-withdrawal basins are predominant in the depression. Contraction that resulted from orogeny played a key function on the formation of salt structures. Growth strata reveal that intense salt structural deformation in the Kuqa depression occurred during the Himalayan movement from Oligocene to Holocene, with early structural deformation in the north and late deformation in the south. Growth sequences also record at least two phases of salt tectonism. In the Yingmaili, Tahe, and Tazhong areas, low-amplitude salt pillows are the most common salt structures, and these structures are commonly accompanied by thrust faults. The faulting and uplifting of basement blocks controlled the location of salt structures. The differences in the geometries of salt structures in different regions show that the thickness of the salt sequences has an important influence on the development of salt-cored detachment folds and related thrust faults in the Tarim Basin. Salt sequences and salt structures in the Tarim Basin are closely linked to hydrocarbon accumulations. Oil and gas fields have been discovered in the subsalt, intrasalt, and suprasalt strata. Salt deformation has created numerous potential traps, and salt sequences have provided a good seal for the preservation of hydrocarbon accumulations. Large- and small-scale faults related with salt structures have also given favorable migration pathways for oil and gas. When interpreting seismic profiles, special attention needs to be paid to the clastic and carbonate interbeds within the salt sequences because they may lead to incorrect structural interpretation. In the Tarim Basin, the subsalt anticlinal traps are good targets for hydrocarbon exploration.

Added on 31 December, 2013

Bulletin Article

Quantifying Cretaceous–Cenozoic exhumation in the Otway Basin, southeastern Australia, using sonic transit time data: Implications for conventional and unconventional hydrocarbon prospectivity

In prospective basins affected by exhumation, uncertainty commonly exists regarding the maximum burial depths of source, reservoir, and seal horizons. One such basin is the Otway Basin, an important gas province in southeastern Australia, which has witnessed several exhumation events. Here, we present estimates of net exhumation magnitudes for 110 onshore and offshore petroleum wells based on the sonic transit time analyses of Lower Cretaceous fluvial shales. Our results show significant post-Albian net exhumation in the eastern onshore Otway Basin (1500 m [4920 ft]) and a generally minor net exhumation (200 m [655 ft]) elsewhere in the Otway Basin, consistent with estimates based on thermal history data. The distribution of net exhumation magnitudes in relation to mid-Cretaceous and Neogene compressional structures indicates that exhumation was dominantly controlled by short-wavelength basin inversion driven by plate-boundary forces. Deeper burial coupled with high geothermal gradients in the onshore eastern Otway Basin and along the northern basin margin during the early Cretaceous have rendered Lower Cretaceous source rocks mostly overmature, with any remaining hydrocarbons from the initial charge likely to be trapped in tightly compacted reservoirs and/or secondary (fracture-related) porosity. However, the embrittlement of these reservoirs during their deeper burial may present opportunities for the development of low-permeability plays through hydraulic fracturing where smectite clay minerals are illitized. Source rocks at near-maximum burial at present day are at temperatures suitable for gas generation, with key controls on prospectivity in these areas including the sealing potential of faulted traps and the relationship between charge and trap development.

Added on 31 December, 2013

Explorer Article By Louise Durham

Tool Aids Interpretation

Breaking from the manual picking methods, 'Geological Expression' interprets complex structural information from 3-D seismic. The result is faster interpretation yielding data that can be quickly manipulated to extract real geological features.

Added on 01 December, 2013

Explorer Director’s Corner By David Curtiss

AAPG Continues to Navigate the Global Waters

Over the past two decades, advances in technology and political choices to encourage the flow of goods, services and capital across borders have contributed significantly to global economic growth.

Added on 01 November, 2013

Explorer Emphasis Article By Louise Durham

UAV Research: Making A Geologic Tool Even Better

Is that a UFO? Actually it is a UAV (unmanned aerial vehicle), which is an airborne drone that is proving to be useful both onshore and offshore.

Added on 01 November, 2013

Explorer Article By Barry Friedman

Surprise! It's a Volcano

Surprise! Geoscientists make an historic discovery of a huge volcano in the Pacific Ocean – in an area first studied 20 years ago.

Added on 01 November, 2013

Publications

About Us

Region Office Contacts

STAY CONNECTED: