Oil Prices Rise Amid Reports Iranian Consulate Hit by Missile Strike in Damascus - 02 April, 2024 07:30 AM
Oil and Gas Execs Reveal Where They See Henry Hub Price Heading - 02 April, 2024 07:30 AM
US Oil Production Breaks Records - 02 April, 2024 07:30 AM
Oil Stays Near Five-Month Highs as Tighter Supply Looms - 01 April, 2024 07:30 AM
US Oil Suppliers Muscling into OPEC+ Markets All Over the World - 01 April, 2024 07:30 AM
2nd Edition: Geological Process-Based Forward Modeling AAPG Call For Abstracts Expires in 27 days
litutmMedium
litutmCampaign
It’s now been shown that the “sweet” aspect of an identified sweet spot can change – not only stratigraphically, but also laterally within the zone itself.
Field analogs allow a better characterization of fracture networks to constrain naturally fractured reservoir models. In analogs, the origin, nature, geometry, and other attributes of fracture networks can be determined and can be related to the reservoir through the geodynamic history. In this article, we aim to determine the sedimentary and diagenetic controls on fracture patterns and the genetic correlation of fracture and diagenesis with tectonic and burial history. We targeted two outcrops of Barremian carbonates located on both limbs of the Nerthe anticline (southeastern France). We analyzed fracture patterns and rock facies as well as the tectonic, diagenetic, and burial history of both sites. Fracture patterns are determined from geometric, kinematic, and diagenetic criteria based on field and lab measurements. Fracture sequences are defined based on crosscutting and abutting relationships and compared with geodynamic history and subsidence curves. This analysis shows that fractures are organized in two close-to-perpendicular joint sets (i.e., mode I). Fracture average spacing is 50 cm (20 in.). Fracture size neither depends on fracture orientation nor is controlled by bed thickness. Neither mechanical stratigraphy nor fracture stratigraphy is observed at outcrop scale. Comparing fracture sequences and subsidence curves shows that fractures existed prior to folding and formed during early burial. Consequently, the Nerthe fold induced by the Pyrenean compression did not result in any new fracture initiation on the limbs of this fold. We assume that the studied Urgonian carbonates underwent early diagenesis, which conferred early brittle properties to the host rock.
The Marcellus Shale is considered to be the largest unconventional shale-gas resource in the United States. Two critical factors for unconventional shale reservoirs are the response of a unit to hydraulic fracture stimulation and gas content. The fracture attributes reflect the geomechanical properties of the rocks, which are partly related to rock mineralogy. The natural gas content of a shale reservoir rock is strongly linked to organic matter content, measured by total organic carbon (TOC). A mudstone lithofacies is a vertically and laterally continuous zone with similar mineral composition, rock geomechanical properties, and TOC content. Core, log, and seismic data were used to build a three-dimensional (3-D) mudrock lithofacies model from core to wells and, finally, to regional scale. An artificial neural network was used for lithofacies prediction. Eight petrophysical parameters derived from conventional logs were determined as critical inputs. Advanced logs, such as pulsed neutron spectroscopy, with log-determined mineral composition and TOC data were used to improve and confirm the quantitative relationship between conventional logs and lithofacies. Sequential indicator simulation performed well for 3-D modeling of Marcellus Shale lithofacies. The interplay of dilution by terrigenous detritus, organic matter productivity, and organic matter preservation and decomposition affected the distribution of Marcellus Shale lithofacies distribution, which may be attributed to water depth and the distance to shoreline. The trend of normalized average gas production rate from horizontal wells supported our approach to modeling Marcellus Shale lithofacies. The proposed 3-D modeling approach may be helpful for optimizing the design of horizontal well trajectories and hydraulic fracture stimulation strategies.
Size fractions (<4 and 0.4–1.0 μ) of Brent Group sandstones from the northern North Sea contain mostly illite-smectite mixed layers with kaolinite, whereas the same size fractions of Fulmar Formation sandstones from the south-central North Sea consist of illite-smectite mixed layers with minor chlorite. Transmission electron microscope observations show elongated illite laths or agglomerates consisting of small laths when larger individual laths are lacking. The K-Ar data of the fractions less than 0.4 μm of Brent Group samples plot on two arrays in a 40Ar/36Ar vs. 40K/36Ar diagram that have isochron characteristics with ages of 76.5 ± 4.2 and 40.0 ± 1.5 Ma, and initial 40Ar/36Ar ratios of 253 ± 16 and 301 ± 18, respectively. For the Fulmar Formation samples, the data points of the fractions less than 0.2 and less than 0.4 μ also fit two isochrons with ages of 76.6 ± 1.4 and 47.9 ± 0.5 Ma and initial 40Ar/36Ar ratios of 359 ± 52 and 304 ± 2, respectively. Some of the coarser 0.4–1.0-μ fractions also plot on the two isochrons, but most plot above indicating the presence of detrital components more than 0.4 μ. The almost identical ages obtained from illite-type crystals of sandstones with different deposition ages that are located about 600 km (373 mi) apart record two simultaneous illitization episodes. These events were not induced by local burial conditions, but are related to episodic pressure and/or temperature increases in the studied reservoirs, probably induced by hydrocarbon injection. This interpretation is indirectly supported by notably different K-Ar illite ages from cores of a nearby reservoir at hydrostatic pressure. Illite is not as well crystallized as expected for potential crystallization temperatures above 160°C measured by fluid-inclusion determinations. In both the northern and south-central North Sea, the two illite generations remain unaffected after crystallization despite continued burial, suggesting notably higher crystallization temperatures than those estimated from geothermal gradients. No recent illite crystallization or alteration is recorded in the K-Ar ages, despite a dramatic regional acceleration of the subsidence in the southern North Sea. ±
Pore-volume reduction of sediments by plastic deformation during compaction and by cementation of grains has been evaluated for different proportions of ductile and hard grains. We represent the compaction behavior of grains with a purely geometric model, which uses the cooperative rearrangement algorithm to produce dense, random packings of partly interpenetrating spheres. We varied the fraction of grains assumed to be ductile and the radius of the rigid core of the ductile grains. The predicted relationship between the fraction of ductile grains in the sediment and the porosity after compaction agrees well with previously published experimental data in the literature. The radius of the rigid core of the ductile grains is an effective way to represent different kinds of ductile material, ranging from brittle (rigid radius 0.9) to extremely ductile (rigid radius 0.7). We simulated quartz cementation in our compacted rock by adding isopachous cement. Cement thickness was reduced on the smaller grains and increased on the larger grains to account for presumed export of pressure-dissolved material from finer grained regions and the import of material into coarser grained regions. These simulations yield descriptions of pore-scale geometry resulting from processes common in sandstones. Modeled pore geometry provides insight into transport properties of such rocks. For example, the models predict, to within a factor of five, the permeability of samples of tight-gas sandstones having little intragranular porosity.
Exploration for oil and gas in Saskatchewan was initiated in 1888 with the spudding of a 472-meter (1,548.5 feet) well near the settlement of Belle Plaine some 32 kilometers (20 miles) west of Regina.
Coming to a field near you – new technology that will reshape the oil and gas industry. When? Maybe sooner than you think.
Using diverse geologic and geophysical data from recent exploration and development, and experimental results of analysis of gas content, gas capacity, and gas composition, this article discusses how geologic, structural, and hydrological factors determine the heterogeneous distribution of gas in the Weibei coalbed methane (CBM) field. The coal rank of the Pennsylvanian no. 5 coal seam is mainly low-volatile bituminous and semianthracite. The total gas content is 2.69 to 16.15 m3/t (95.00–570.33 scf/t), and gas saturation is 26.0% to 93.2%. Burial coalification followed by tectonically driven hydrothermal activity controls not only thermal maturity, but also the quality and quantity of thermogenic gas generated from the coal. Gas composition indicates that the CBM is dry and of dominantly thermogenic origin. The thermogenic gases have been altered by fractionation that may be related to subsurface water movement in the southern part of the study area. Three gas accumulation models are identified: (1) gas diffusion and long-distance migration of thermogenic gases to no-flow boundaries for sorption and minor conventional trapping, (2) hydrodynamic trapping of gas in structural lows, and (3) gas loss by hydrodynamic flushing. The first two models are applicable for the formation of two CBM enrichment areas in blocks B3 and B4, whereas the last model explains extremely low gas content and gas saturation in block B5. The variable gas content, saturation, and accumulation characteristics are mainly controlled by these gas accumulation models.
Sequence stratigraphy and coal cycles based on accommodation trends were investigated in the coal-bearing Lower Cretaceous Mannville Group in the Lloydminster heavy oil field, eastern Alberta. The study area is in a low accommodation setting on the cratonic margin of the Western Canada sedimentary basin. Geophysical log correlation of coal seams, shoreface facies, and the identification of incised valleys has produced a sequence-stratigraphic framework for petrographic data from 3 cored and 115 geophysical-logged wells. Maceral analysis, telovitrinite reflectance, and fluorescence measurements were taken from a total of 206 samples. Three terrestrial depositional environments were interpreted from the petrographic data: ombrotrophic mire coal, limnotelmatic mire coal, and carbonaceous shale horizons. Accommodation-based coal (wetting- and drying-upward) cycles represent trends in depositional environment shifts, and these cycles were used to investigate the development and preservation of the coal seams across the study area. The low-accommodation strata are characterized by a high-frequency occurrence of significant surfaces, coal seam splitting, paleosol, and incised-valley development. Three sequence boundary unconformities are identified in only 20 m (66 ft) of strata. Coal cycle correlations illustrate that each coal seam in this study area was not produced by a single peat-accumulation episode but as an amalgamation of a series of depositional events. Complex relations between the Cummings and Lloydminster coal seams are caused by the lateral fragmentation of strata resulting from the removal of sediment by subaerial erosion or periods of nondeposition. Syndepositional faulting of the underlying basement rock changed local accommodation space and increased the complexity of the coal cycle development. This study represents a low-accommodation example from a spectrum of stratigraphic studies that have been used to establish a terrestrial sequence-stratigraphic model. The frequency of changes in coal seam quality is an important control on methane distribution within coalbed methane reservoirs and resource calculations in coal mining. A depositional model based on the coal cycle correlations, as shown by this study, can provide coal quality prediction for coalbed methane exploration, reservoir completions, and coal mining.
The fact that velocity models based on seismic reflection surveys commonly do not consider the near-surface geology necessitates filling the gap between the top of a velocity model and the surface of the Earth. In this study, we present a new workflow to build a shallow geologic model based exclusively on borehole data and corroborated by laboratory measurements. The study area is in Chemery (France), located at the southwestern border of the Paris Basin, where a large amount of borehole data is publicly available. The workflow starts with identifying lithologic interfaces in the boreholes and interpolating them between the boreholes. The three-dimensional (3-D) geometry of the lithologies then allows interpretation of the position, orientation, and offset of fault planes. Given the importance of the fault interpretation in the modeling process, a combination of different approaches is used to obtain the most reasonable structural framework. After creating a 3-D grid, the resulting 3-D structural model is populated with upscaled velocity logs from the boreholes, yielding the final near-surface P-wave velocity model. To better constrain the velocity model, we conducted laboratory measurements of P- and S-wave velocities in dry and water-saturated conditions on all lithologies in the model. The laboratory data were used to populate the 3-D near-surface model with VP/VS ratio values. The presented workflow accounts for one-dimensional borehole data and is much more iterative and time-consuming than workflows based on two-dimensional seismic sections. Nevertheless, the workflow results in a robust 3-D near-surface model allowing for structural interpretations and revealing the 3-D seismic velocity field.
This one-day field trip will provide an introduction to a Miocene-Pliocene succession of southern Sicily, which includes outcrops of the Messinian Salinity Crisis (MSC), as well as the Messinian-Zanclean GSSP (Global Boundary Stratotype Sections and Point) and Zanclean stratotype. The MSC sedimentary record consists of an evaporitic-carbonate unit at the base (the Basal Limestone), overlain the Lower Gypsum unit, in turn overlain by the Upper Gypsum unit, and sealed by transgressive chalk deposits of the Trubi Fm. The Lower Gypsum unit (massive gypsum with cm-sized selenite crystals) will be visited along the beach of Siculiana Marina (about 15 km NW of Agrigento). Next, we will visit near Capo Rossello (about 10 km NW of Agrigento) an outcrop of the Upper Gypsum unit consisting of clay-gypsum cycles and overlain by the Trubi Fm. The latter, at Scala dei Turchi beach, consists of chalk deposits arranged in a spectacular thick succession (~120 m thick) interpreted as astronomically-controlled depositional cycles. The uppermost interval of the MSC sedimentary record, including the Messinian-Zanclean GSSP, will be observed along the beach of Eraclea Minoa located about 20 km NW of Capo Rossello. Pricing Fee: €50 Attendee Limit: Min 15 - Max 50 People Registration Deadline: 11 April 2024 Field Trip Rendezvous Point Hotel nH Palermo Field Trip Leaders Antonio Caruso University of Palermo Attilio Sulli University of Palermo
This one-day field trip will focus on Mesozoic (Jurassic to Cretaceous) carbonates outcropping in the fold and thrust belt of western Sicily and equivalent to the aquifer complex of the Sciacca Geothermal Field located in the southwestern part of the island. Participants will have the opportunity to visit in the first stop a spectacular “drowned” carbonate-platform succession at Mt. Maranfusa located in an inactive quarry about 50 km SW of Palermo. The succession consists of Lower Jurassic peritidal cycles overlain by Middle Jurassic to Cretaceous pelagic limestone (e.g. ammonitic limestone, “chalk”) and marked by an unconformity with locally hardground. Syn-depositional Mesozoic tectonic is characterized by neptunian dykes and normal faults, whereas reverse faults, strike-slip faults, and joints are related to subsequent Cenozoic deformation. In the second stop, at Mt. San Calogero, adjacent to the picturesque coastal town of Sciacca (about 100 km south of Palermo), we will visit the surface expression of an extensive karst system linked to uprising geothermal fluids. Furthermore, we will discuss main characteristics of the Sciacca Geothermal Field and its connection to deep mantle-derived fluids. Outcrop data will be integrated with both 2D seismic lines and exploration well logs showing the stratigraphy and structure of the deep aquifer. Given the presence of faults and joints in the outcrops, this field trip can provide the participants with valuable insights into naturally fractured reservoirs at the sub-seismic scale. Pricing Fee: €50 Attendee Limit: Min15 - Max 45 People Registration Deadline: 11 April 2024 Field Trip Leaders Gianni Mallarino MOL Group Attilio Sulli University of Palermo
Time: 8:00am - 5:00pm Fee: $300 AAPG members $350 Nonmembers $200 Academic/AAPG Emeritus Members $50 discount for workshop registrants Fee Includes: Transportation Insurance Field guide Entrance fee to Banff National Park Registration available during workshop registration This field trip will focus on the structural geology of the foothills and Front Ranges of Banff. Participants will be able to view excellent field examples of structures very similar to the producing oil and gas fields in the foothills to the west of Calgary and to learn about the complexities of sub-seismic-scale deformation. The field trip starts with an introduction to the interaction between thrust front with foreland basins and the interaction of basement trends with thrust belt geometries and (conventional) hydrocarbon fields. During the 1-day trip participants will follow a dip transect from the undeformed foreland basin, the eastern edge of the foothills marked by the triangle zone, the Front Ranges boundary and end at the Main Ranges west of Banff. Field Trip Itinerary Depart from Calgary – 8:00 a.m. Stop 1: Cochrane Retreat Road Overlook Trip overview and introduction; safety and logistics comments; interaction of thrust front with foreland basin; interaction of basement trends with thrust belt geometry and (conventional) hydrocarbon field distribution; appreciation of scale for subsurface play fairway. Stop 2: Scott Lake Stop 3: The Stony Nakoda Tim’s Classic stop, with historical importance for understanding the thrust belt and thrust geometry. Part 1 of displacement gradient on a large thrust. Most importantly, toilet stop after all the Tim’s coffee and driving. Review of Mt Yamnuska from a different perspective; preview of drive through McConnell damage zone and change in HW stratigraphy.. Stop 4: Lac des Arcs Imbricate thrust sheets in the Front Ranges and Banff Formation. Stop 5: Canmore T-junction Observe complexities of sub-seismic-scale deformation in mechanically layered rocks in the footwall of a large thrust Stop 6: Canmore strike view of the Rundle thrust Exposed strike view analogous to a cut-away of a giant conventional Foothills hydrocarbon field such as Turner Valley. Cross faults within the thrust sheet offset potential reservoir units at sub-seismic scale. Cross faults are arguably part of a regional trend associated with deeper, basement-rooted NE-SW structures. Stop 7: Mt Norquay Overlook Stop 8: Bow Falls Fracture systems in the Vega Siltstone Mbr of the Triassic Sulphur Mtn Fm. This outcrop of Vega Member siltstone of the Sulphur Mtn Fm is considered equivalent to upper Montney Fm. We will focus on the outcrop adjacent to the steps up to the Falls overlook.
This Symposium marks a collaborative event that brings together AAPG Europe and AAPG Middle East, with a central focus on carbonates and mixed carbonate systems worldwide, while highlighting their significance within these two regions. The primary objectives are an overview of controls that govern the evolution of these systems in time and space and the characterization and prediction of their properties across scales.
In order to support the energy transition, optimizing exploration and production from complex stratigraphic-diagenetic conventional and unconventional plays remains highly important. At the same time, Carbon Capture and Storage (CCS) poses new technological challenges that will impact both the industry and academia for decades to come. This 2nd edition will present reviews and discuss technology developments in geological process-based forward modeling achieved during the last 2 years. New perspectives for future technology developments and implementation in industry workflows will be discussed and with the additional focus on CO₂ storage and other sustainability-related applications, the scope of the workshop will be considerably extended.
President Biden has laid out a bold and ambitious goal of achieving net-zero carbon emissions in the United States by 2050. The pathway to that target includes cutting total greenhouse gas emissions in half by 2030 and eliminating them entirely from the nation’s electricity sector by 2035. The Office of Fossil Energy and Carbon Management will play an important role in the transition to net-zero carbon emissions by reducing the environmental impacts of fossil energy production and use – and helping decarbonize other hard-to abate sectors.
Request a visit from Jennifer Wilcox!
Physics is an essential component of geophysics but there is much that physics cannot know or address.
Request a visit from John Castagna!
The carbonate sequences that were deposited in the now exhumed Tethyan Ocean influence many aspects of our lives today, either by supplying the energy that warms our homes and the fuel that powers our cars or providing the stunning landscapes for both winter and summer vacations. They also represent some of the most intensely studied rock formations in the world and have provided geoscientists with a fascinating insight into the turbulent nature of 250 Million years of Earth’s history. By combining studies from the full range of geoscience disciplines this presentation will trace the development of these carbonate sequences from their initial formation on the margins of large ancient continental masses to their present day locations in and around the Greater Mediterranean and Near East region. The first order control on growth patterns and carbonate platform development by the regional plate-tectonic setting, underlying basin architecture and fluctuations in sea level will be illustrated. The organisms that contribute to sequence development will be revealed to be treasure troves of forensic information. Finally, these rock sequences will be shown to contain all the ingredients necessary to form and retain hydrocarbons and the manner in which major post-depositional tectonic events led to the formation of some of the largest hydrocarbon accumulations in the world will be demonstrated.
Request a visit from Keith Gerdes!
For well over a century there have been conflicting indications of the strength of the crust and of faults and what controls them. Much of our ignorance comes quite naturally from the general inaccessibility of the crust to measurement--in contrast with our understanding of the atmosphere, which is much more accessible to observation as well as more rapidly changing. Crustal strength is best understood in deforming sedimentary basins where the petroleum industry has made great contributions, particularly in deforming petroleum basins because of the practical need to predict. In this talk we take a broad look at key issues in crustal strength and deformation and what we can learn from boreholes, earthquakes, active fault systems, and toy models.
Request a visit from John Suppe!
Around 170 million years ago, the Gulf of Mexico basin flooded catastrophically, and the pre-existing landscape, which had been a very rugged, arid, semi-desert world, was drowned beneath an inland sea of salt water. The drowned landscape was then buried under kilometers of salt, perfectly preserving the older topography. Now, with high-quality 3D seismic data, the salt appears as a transparent layer, and the details of the drowned world can be seen in exquisite detail, providing a unique snapshot of the world on the eve of the flooding event. We can map out hills and valleys, and a system of river gullies and a large, meandering river system. These rivers in turn fed into a deep central lake, whose surface was about 750m below global sea level. This new knowledge also reveals how the Louann Salt was deposited. In contrast to published models, the salt was deposited in a deep water, hypersaline sea. We can estimate the rate of deposition, and it was very fast; we believe that the entire thickness of several kilometers of salt was laid down in a few tens of thousands of years, making it possibly the fastest sustained deposition seen so far in the geological record.
Request a visit from Frank Peel!
As oil and gas exploration and production occur in deeper basins and more complex geologic settings, accurate characterization and modeling of reservoirs to improve estimated ultimate recovery (EUR) prediction, optimize well placement and maximize recovery become paramount. Existing technologies for reservoir characterization and modeling have proven inadequate for delivering detailed 3D predictions of reservoir architecture, connectivity and rock quality at scales that impact subsurface flow patterns and reservoir performance. Because of the gap between the geophysical and geologic data available (seismic, well logs, cores) and the data needed to model rock heterogeneities at the reservoir scale, constraints from external analog systems are needed. Existing stratigraphic concepts and deposition models are mostly empirical and seldom provide quantitative constraints on fine-scale reservoir heterogeneity. Current reservoir modeling tools are challenged to accurately replicate complex, nonstationary, rock heterogeneity patterns that control connectivity, such as shale layers that serve as flow baffles and barriers.
Request a visit from Tao Sun!
While there are many habitats that are associated with the deposition of organic-rich marine and lacustrine source rocks, one important pathway is linked to the onset of increased basin subsidence associated with major tectonic events. A key aspect is that this subsidence is spatially variable, with the uplift of basin flanks contemporaneous with the foundering of the basin center, resulting in a steeper basin profile.
Request a visit from Kurt W. Rudolph!
In comparison with the known boundary conditions that promote salt deformation and flow in sedimentary basins, the processes involved with the mobilization of clay-rich detrital sediments are far less well established. This talk will use seismic examples in different tectonic settings to document the variety of shale geometries that can be formed under brittle and ductile deformations.
Request a visit from Juan I. Soto!
Climate change is not only happening in the atmosphere but also in the anthroposphere; in some ways the former could drive or exacerbate the latter, with extreme weather excursions and extreme excursions from societal norms occurring all over the earth. Accomplishing geoscience for a common goal – whether that is for successful business activities, resource assessment for public planning, mitigating the impacts of geological hazards, or for the sheer love of furthering knowledge and understanding – can and should be done by a workforce that is equitably developed and supported. Difficulty arises when the value of institutional programs to increase equity and diversity is not realized.
Request a visit from Sherilyn Williams-Stroud!
Paleozoic North America has experienced multiple mountain building events, from Ordovician to Permian, on all margins of the continent. These have had a profound effect on the resulting complex basins and their associated petroleum systems. Subsequent uplift, erosion and overprinting of these ancient systems impedes the direct observation of their tectonic history. However, the basin sedimentary records are more complete, and provide additional insights into the timing and style of the mountain building events. In this study, we employ ~90 1D basin models, ~30 inverse flexural models, isopachs, and paleogeographic maps to better understand the Paleozoic history of North America.
Ticks and clicks 638476476709062564